Upgrade for Packard Bell Argo C

[drollio]

hello everybody,
i'am searching for a unlocked bios version for a packard bell easynote argo c, i already managed to upgrade te cpu from a celeron to t5600 core 2 duo and 2 gb , want to go to 4gb ( tried already ) but is not stable with 4gb so i want furgure out what te voltages are on the memory banks and ras to cas ect , but i need the avandced menu to do so. can anyone help me out here
greetings Jarno

[drollio]

i found out that it is actualy a packard bell mz 35 , found this is in the systeeminfo , maybe it helps, if anyone could help me out here also need silc 2.1 . greetings jarno

[dabb]

i found out that it is actualy  a packard bell mz 35 , found this is in the systeeminfo , maybe it helps, if anyone could help me out here also need silc 2.1 . greetings jarno

Yeah, I know its an old tread
I have the same Packard Bell Argo C With bios v0.20 and a Celeron 430. No OS yet, not shure if it runs win x64, so I have not decided.
If someone knows what I can Upgrade to, I apreciate it

[DeathBringer]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with current CPU.

[dabb]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with current CPU.

You`re the man (again) DeathBringer!

Here`s the info from CPU-Z 
Notice that CPU-Z shows 4 memory slots (2 empty and 2 With ram (?))
The Wireless lan cant Connect to wifi, but I`m using XP pro from 2002 (just to test)

[DeathBringer]

Your laptop is based on RC410M chipset.
All CPUs for Socket M are supported.
T7200, T7400, T7600(G) are recommended for upgrade.
Official maximum of memory - 2 Gb, unofficial - 3 Gb.

[dabb]

Your laptop is based on RC410M chipset.
All CPUs for Socket M are supported.
T7200, T7400, T7600(G) are recommended for upgrade.
Official maximum of memory - 2 Gb, unofficial - 3 Gb.

Thanks man
Well, the 7600G is a no-og, since it is fairly costly  Maybe a T7600 or the cheap t7400
Have any idea of config of ram (mhz and so) I should get?

[DeathBringer]

Notice that CPU-Z shows 4 memory slots (2 empty and 2 With ram (?))

I think it's a bug of CPU-Z.

Have any idea of config of ram (mhz and so) I should get?

DDR2 667 Mhz
One 2GB SODIMM with 16(!) chips and one 1Gb SODIMM with 8 (!) chips.
Or two identical 1Gb SODIMMs.

[dabb]

Notice that CPU-Z shows 4 memory slots (2 empty and 2 With ram (?))

I think it's a bug of CPU-Z.

Have any idea of config of ram (mhz and so) I should get?

DDR2 667 Mhz
One 2GB SODIMM with 16(!) chips and one 1Gb SODIMM with 8 (!) chips.
Or two identical 1Gb SODIMMs.

Thank you very, very much

[dabb]

I guess it is not possible to run Win10 x64 on this Laptop, due to not NX-support?

I`m running win7 x64 pro with T7400 cpu and 3 gb ram as you recommended - Works great

Yeah, I know its an oldie, but after bios-upgrade, a lot of settings disseapeared, but that was maybe useless setting, I dont know