Westmere EP (Xeon 56xx) support for Fujitsu-Siemens D2618-Bx

[DeathBringer]

Does it start without A2618_B1.OMF ?

[PapaDos]

Does it start without A2618_B1.OMF ?

Yup, it does. It even finished without it trouble free.

The order of flashing is next:
-D
-M
-C
-P6_Intel

And after that Sectors 00-14 begin.

[DeathBringer]

OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.

if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.

[PapaDos]

OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.

if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.

It didn't fail, but posted warning.
Continue anyway?

[DeathBringer]

Try it.

[PapaDos]

OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.

if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.

Continued..
The result is the same as before. "Programm aborted" - file "Autoexec_Mod-BIOFm2-Continue".

Tried to substitute A2618_C1 with renamed A2618_B1 (ren-d as C1) - file "Autoexec_Mod-BIOFm2-A2618_BxRenAsCx".
No luck (

[DeathBringer]

1. Make flashing disk with BiosPack for D2618-Bx
2. Copy modded file D2618_C1.OCF to this disk. Rename it to D2618_B1.OCF
3. Boot, wait for error or message "Continue anyway (y/[n])", make a photo of results and press n.

[DeathBringer]

No feedback - no more help.