X11DPT-PS and Xeon Gold 6126F ( Omni Path Fabric ) support

[DeathBringer]

The reason of your problem is incorrect value of IA32_PACKAGE_THERM_STATUS
Did you tried to downgrade version of BIOS?

[ahasan]

No I didnt because there is no downgrade versions of this bios for this board. Any chance to correct this in this current version?

[DeathBringer]

Run RWEverything again.
Press CPU MSR registers button, press User list button or F5, type a=0x1b2, press Add, press Done.
Post a screenshot with results.

[ahasan]

I am sorry its takes 5 minutes to reboot the server. Here the results attached.

[DeathBringer]

OK. Now go to Access->Command
Type a command:
cpuid 6
Post a screenshot with results.

BTW: I've found some BIOS for motherboard:
R 1.0a - https://www.supermicro.com/Bios/softfile...S7_620.zip
R 1.0b - https://www.supermicro.com/Bios/softfile...S7_923.zip
R 2.0 - https://www.supermicro.com/Bios/softfile...S7_B30.zip
R 2.0b - https://www.supermicro.com/Bios/softfile...S8_224.zip
2.1 - https://www.supermicro.com/Bios/softfile...S8_823.zip
3.1 - https://www.supermicro.com/Bios/softfile...S9_430.zip
3.2 - https://www.supermicro.com/Bios/softfile...SUM230.zip
3.3 - https://www.supermicro.com/Bios/softfile...SUM240.zip

[ahasan]

Ok here are the results attached .

Wow thank you so much. I can try these bios now but it might break your current work. I will do it later. BTW latest bios is always better because there are many security mitigations on the new bios.

PS: I have tested the 2.1 btw. It didnt work and same problem exists

[DeathBringer]

Test all previous versions. And make screenshot of CPU MSR registers and Command (with cpuid 6) with each BIOS version.

[DeathBringer]

Can you boot in Linux?
I need result of spsInfoLinux64 from this package
Try run it with key -verbose

[ahasan]

This is for bios 2.1   . I cannot install 1.0b because its giving warning on the ipmi bios update interface.

[ahasan]

Here the spsinfo results attached.