hp 14-v062us slic 2.1 request

[sodapopdima]

Requesting for SLIC 2.1 for Win 7:

- Manufacturer: HP
- Model: hp 14-v062us
- Bios Revision: F.42 Rev.A (Sept 18, 2015)
- Bios Link: http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71055.exe
- Bios Type: Insyde H2O
- RWEverything Report - http://rghost.net/download/6yNpLZMb2/440...cpiTbls.rw


Many Thanks in Advance!!!   

[BDMaster]

Only Sp5xxxx.exe and not all (until 12-2011) acn be modded and rewrite !
All the rest only using the Tools (SPI PGM + Clip) !
We can try using FPT if do You want to make some tests !
Use this tool run It as Admin and upload here the result file :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

P.S. I tried in the past and It's Eeprom Chip Protected, but now We can try the Sleep Bug !

[sodapopdima]

Only Sp5xxxx.exe and not all (until 12-2011) acn be modded and rewrite !
All the rest only using the Tools (SPI PGM + Clip) !
We can try using FPT if do You want to make some tests !
Use this tool run It as Admin and upload here the result file :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

P.S. I tried in the past and It's Eeprom Chip Protected, but now We can try the Sleep Bug !

I will try getting AIDA but here are the other two results.  Currently I am on BIOS (older version) F.030
 I avoided upgrading because I didn't know if it was better or easier to upgrade to a newer modded slic2.1 version than to try to force an upgrade over the same version.

If you need these same results from newer version just let me know and I can run them again after updating.

http://rghost.net/download/6scwFll8X/d51...Backup.rar

http://rghost.net/download/8wWKX6z5f/c9a...esults.rar


[update]
Got the AIDA64 Report Full here:

http://rghost.net/download/6WXjG89RV/338...Report.htm

Hope this helps.

[BDMaster]

Ok Error 280,
so now We have to . . .
Now We have to see if Sleep Bug is Activate yet !
So put your laptop into Sleep Mode (just close the Lid) and then Wacke-Up It
(reopen the Lid), then redo the result files (I hope last time !)
I hope that Sleep Bug I found on Insyde Bios working is yet Activated on HP
laptop too and We will rewrite back the Bios Mod by FPTw !
Let me know
Regards

[sodapopdima]

Ok Error 280,
so now We have to . . .
Now We have to see if Sleep Bug is Activate yet !
So put your laptop into Sleep Mode (just close the Lid) and then Wacke-Up It
(reopen the Lid), then redo the result files (I hope last time !)
I hope that Sleep Bug I found on Insyde Bios working is yet Activated on HP
laptop too and We will rewrite back the Bios Mod by FPTw !
Let me know
Regards

Just to confirm you want sleep (not hibernate).  Right now the laptop hibernates so I will need to disable that first to do this then.
I will try later, I a not home now.
After sleep and and wake up, do you want all the tests to be run again including AIDA64?

[BDMaster]

AIDA64 is just to see Configuration and Chipset !

[sodapopdima]

AIDA64 is just to see Configuration and Chipset !

Hope it helps

1.
http://rghost.net/download/7JS9q6YGG/ac6...e-F.03.rom

2.
http://rghost.net/download/8Yhg5GtdM/b7b...esults.rar


Also, let me know if it is helpful to you for me to upgrade to original latest BIOS and repeat results.

[BDMaster]

Where is Original Installer file of Bios v.F.03 ?

[sodapopdima]

F.03 is the current bios, it was already on laptop. The request was for latest bios available.

I can upgrade to latest bios and run test again if that's what you want or need.

[BDMaster]

All Bioses have same Error 280 so Eeprom Chip is Write Protected and We can
rewrite Bios Mod back only using the Tools (SPI PGM + Clip) !
You can try to activate Slic 2.1 using PCID change . . . look here :

http://forums.mydigitallife.info/threads...ies/page45

http://forums.mydigitallife.info/threads/7033-Insyde-bios-mod-requests/page1250?p=686068&viewfull=1#post686068

let me know
Regards
P.S. if You get the SPI Programmer I will try to make full unlocked Firmware so Slic + NWL + ADV !