slic v2.1 for Rioworks HDAMA Dual AMD "Sorry"

[Britlord]

Bios Version 1.89
Phoenix BIOS

http://www.flextronics.com/computing/sup...AMA189.zip

Please, Please..

Thanks..

[1234s282]

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Rioworks%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[Britlord]

Sorry for your work (my fault) but the bios version is wrong. I just got the board and found out that it is a version -E, so here the correct bios. (it supports dual core)..

Bios Version 2.09
Phoenix BIOS

http://www.accelertech.com/2007/assets/hdama_192.zip

[1234s282]

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Rioworks%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[Britlord]

arrgg. your gonna hate me but again I bloody well goofed up (wrong link) here's the right one. Sorry again..

Bios Version 2.09
Phoenix BIOS

http://www.lovenotestudios.com/DashcatPS..._v2.09.zip

[1234s282]

v2.09 HP 2.1 SLIC

http://dl.dropbox.com/u/747181/Rioworks%...34s282.zip

Flash at your own risk!

Follow instructions posted previously

Regards
Admin

[Britlord]

Thankyou!!!!