toshiba a300-1lt psagce bios mod plase

[poneryas]

hi ı am turkhs bad inglis

insyde H20 bios
but
http://eu.computers.toshiba-europe.com/i...service=EU

I use this version of "given plase help

[1234s282]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[poneryas]

Thank you, but I used to be the same as with bios version does not load, as shown in the picture. bulamdım old version. Many thanks for your help.
best regards

[1234s282]

Flash from DOS using a bootable DOS USB/DVD/CD/Floppy

Follow the tutorial on this site for Award bioses , just use the Insyde flash utility instead of awdflash.exe

Regards
Admin

[poneryas]

but the last thing I do not know much olurmu you send me the cd set to flash veay

best regards

[1234s282]

found an easier way!!

in the download , open the platform.ini file in Notepad and find where it says:

[Bios_Version_Check]
flag=1

Change flag=1 to flag=0 and save the file - now flash using the Insydeflash Tool and it wont give you that message!

good luck!

Admin

[poneryas]

Thank you for helping to works very well.

best regards

[1234s282]

Thank you for helping to works very well.

best regards

So your all activated and done? So i can move this to confirmed?

[poneryas]

:)

[Mex]

delete please