Alienware M15x

[AHMED HOSSAM]

HI ,

It was just a simple error i have made in this menu
here is the new modified bios which contains the performance menu and the 2 other lost menus
  ALIENWIRE M15X MODIFIED BIOS WITH QPI MENUS.rar (Size: 1.04 MB / Downloads: 431)

i`m sorry for the previous modified bios but i think this new one would works great

also please upload few pics for the new menus inside the performance menu.

i`m waiting your reply

EDIT :- THIS MODIFIED BIOS ONLY HAS UNLOCKED SATA MENUS AND IGD MENU ( NO QPI MENUS )

[svl7]

Regarding eSATA Port Multiplier, be careful when trying it because data lost/corrupted will occur. If your notebook use either PM55 or HM55 chipset, Port Multiplier is not supported.

Ok thanks, yeah... you're right. I once checked the chipset datasheets and it isn't listed there, totally forgot this.

---

Unfortunately no... the only thing that changed is that "SATA hard drive" and "SATA optical drive" is now back in the "advanced" tab. Nothing new, and "Performance" options are still gone.

[AHMED HOSSAM]

the same mistake again!!!!!
i`m really sorry fir this .
i will modify it again now , please wait .

---

WELL , I THINK I HAVE FIXED THIS THIS TIME
I`M SORRY FOR THIS BUT I HAVE LOST CONCENTRATION IN THE PREVIOUS EDITS.

TRY THIS AND IT WOULD WORK NOW
  ALIENWORE M15X UNLOCKED BIOS.RAR (Size: 1.04 MB / Downloads: 1,297)

---

I`M WAITING YOUR REPLY .

[svl7]

Excellent work!! Now everything you said is available!!

Will test these new options during the next days, now I need some sleep, it's very late here

Thank you so much!! Donation will come.

[AHMED HOSSAM]

FINALLY , this works as i managed i really don`t knew how i lost my concentration at the previous modifications , but now it works well

thanks for the pics

if you have changed any setting and the notebook didn`t boot .
you should disassemble your notebook then remove the CMOS battery for 20 to 30 minutes and this would restore the CMOS defaults and make the notebook bootable again .

thanks for testing this modified bios

---

THREAD MOVED TO UNLOCKED PHOENIX BIOSES SECTION .

[svl7]

Haven't had a lot of time for testing so far, but changing the QPI Frequency doesn't affect anything as far as I've seen. At least CPU-Z reports no change of the QPI speed, when I raise it to 6.4GT/s it stays at 2.4GHz instead of going up to 3.2GHz. Will have to do more testing to say anything final, but it doesn't seem to work. May be chipset related, I don't know, have to check some datasheets.

[AHMED HOSSAM]

well , i think overclocking not only depends on CPU but also depends on the chipset in your motherboard.
infact i didn`t try overclocking any of the CORE-i series .
it may be you should modify other option before adjusting QPI or something like that.
also , in phoenix bioses we just unlock the menus and options but we don`t get involved with the routines which make the option works cause we don`t knew where these routines are located
just try refering to the datasheets .

[dantistruct]

Sorry, but where or how do I go about installing the files. I haven't tried it as yet but would like to know where I place these files. Thank you.

[AHMED HOSSAM]

the bios attached in post no. 23 is the full unlocked one .
you should flash the bios.wph file using winphlash tool from windows or using PHLASH16.EXE from dos .

[dantistruct]

the bios attached in post no. 23 is the full unlocked one .
you should flash the bios.wph file using winphlash tool from windows or using PHLASH16.EXE from dos .

Sorry to be a bother again, but I would like to get a step by step (If I'm not wasting your time, or if your not to busy) on how to do this using Winphlash x64bit please. I have done the A09 update a while back using the HP method but that's installing new BIOS not flashing or modifying an existing one. If its not to much of a bother if you can give a step by step instruction list please. Thank you.