Asus Rampage III Gene OROM Mod

[nicke85]

Any news for updated bios?
Can TRFC in ram timmings being increased for values 170,180,190,200,210,220 etc. by mod?
I would like to get maximum from my ram.
Regards

[pir8man]

Any news for updated bios?
Can TRFC in ram timmings being increased for values 170,180,190,200,210,220 etc. by mod?
I would like to get maximum from my ram.
Regards

updating OROMs would not affect TRFC options.  If that mod is available, it is in a different thread/forum.

Updated BIOS news: rampageiii_gene_1003_s19

Changelog:
CPU Microcode Update: 2015 (all compatible XEONs)
Intel 82567V-2 Gigabit Network: v1.5.8

[swockan]

Any news for updated bios?
Can TRFC in ram timmings being increased for values 170,180,190,200,210,220 etc. by mod?
I would like to get maximum from my ram.
Regards

updating OROMs would not affect TRFC options.  If that mod is available, it is in a different thread/forum.

Updated BIOS news: rampageiii_gene_1003_s19

Changelog:
CPU Microcode Update: 2015 (all compatible XEONs)

Intel 82567V-2 Gigabit Network: v1.5.8

-------------------------------------------------------------------

Nice one! Just snagged a gene with a 930 in it and have a x5690 (EDIT: X5675) laying around doing nothing at home. Will try this out soon. Thank you. This version is not with OROM updated? Thinking going with s18t first update seems to be around 2.2 mb and then this for latest fixes and microcodes?
If this is totally out of bounds I've been in a car for 6 hours straight so vision is blurry and posts are hastily written.

[rjohn]

pir8man does it includes latest firmwares of the rest devices like zio posted in 1st page ? i mean is it an updated version of zio bios ?
thanks.

[pir8man]

I was updating my current set of boards for Spectre/Meltdown bug and decided to re-update this old thread.  I do not use this board and cannot test the release.  ALSO, I do not monitor this thread as I do not own this board.  so PM me if you have any issues and I will look into any bugs found.

Marvel 91xx updated:
Bootloader: v1.0.1.0002b
Firmware: v2.2.0.1125b
AHCI ROM: v1.0.0.1038

Intel RST RAID ROM: v11.2.0.1527 or V13.5.0.2164

Intel 82567V-2 Gigabit Network: v1.5.50

CPU MicroCode Updates:
106A4 Revision 13 (2015-06-30)  [No more udpates as Intel deemed unsupported]
106A5 Revision 1D (2018-05-11)
206C2 Revision 1F (2018-05-08)

++++++++++++++++++++++++++++++++++++++++++++

Attached RAR has two files.  One has Intel RST v11.2.0.1527, which is recommended for all users except those that need Intel SATA RAID features in Windows 10.  Windows 10 has a minimum software version to manage the Intel RAID which required a newer OROM v13.5.0.2164 for compatibility.  This OROM functions a bit slower, so it is only recommended if you NEED Intel SATA set to RAID mode an you run Windows 10.

EDIT: attachment removed due to space constraint. See newer release in post #37.

[rjohn]

thanks.

[pir8man]

Another update for you R3G owners.  I don't know why I do this, but here you go...

A bug/issue was found in Marvell firmware that broke compatibility with BIOS Drive Xpert feature.  Rolling back the firmware fixed the issue and gives the same benchmark speeds.  As this is an update to the code that runs on the Marvell Chip itself.  You will notice updating chip on first boot.  Once this step completes and you see "Update Success!", press reset to boot up normally.

Use the 'W10R' release if you run Intel RAID in Windows 10.  Use the 'ANY' release for any other OS setup including: Intel in AHCI with Win10.

Changes:
Marvell 91xx SATA 6G - Firmware: v2.2.0.1125 -> v2.1.0.1413 (Drive Xpert fix)

[rjohn]

hello

anyone has moded this bios with nvme support ?
like ( https://www.win-raid.com/t871f50-Guide-H...-BIOS.html )

[nicke85]

Another update for you R3G owners.  I don't know why I do this, but here you go...

A bug/issue was found in Marvell firmware that broke compatibility with BIOS Drive Xpert feature.  Rolling back the firmware fixed the issue and gives the same benchmark speeds.  As this is an update to the code that runs on the Marvell Chip itself.  You will notice updating chip on first boot.  Once this step completes and you see "Update Success!", press reset to boot up normally.

Use the 'W10R' release if you run Intel RAID in Windows 10.  Use the 'ANY' release for any other OS setup including: Intel in AHCI with Win10.

Changes:
Marvell 91xx SATA 6G - Firmware: v2.2.0.1125 -> v2.1.0.1413 (Drive Xpert fix)

Perfect, thank you for update!!! ♥_♥
I still work on R3Gene,48gb ram,Xeon W3690,Samsung NVME 950 pro 512gb in 2019 year haha
I have two P9X79-E WS and two E5 1680v2 but don't need to use it, don't know why I buy all that when X58 rock!!! 

[d_yar]

Hello! I have some problem with R3G_1003_S21.rar bios rom. When I enable intel raid mode, bios not detect marvel controller!!! Any ideas? Thank you!!!