Login

DaveH · (This post was last modified: 12-09-2011, 07:01 PM by camiloml.)

Hi everyone
I need help to unlock the Advanced Menu > Video Configuration > IGD - DVMT Pre-Allocated (The option to set memory to graphics card)

But if it makes it easier for you, then you can upload the unlocked whole Advanced Menu or the whole Video Configuration submenu (whichever is easier for you) Smile

And if possible, I'd appreciate if you upload the bios file in .bin

Thanks in advance if you could help Big Grin

Bios Download (sp55454; most recent):
http://h10025.www1.hp.com/ewfrf/wc/softw...28&sw_lang=

Older version (sp53126; stable)
http://h10025.www1.hp.com/ewfrf/wc/softw...28&sw_lang=

Screenshot:
[Image: zlvwxd.jpg]

**camiloml** · 12-09-2011, 07:01 PM

http://dl.dropbox.com/u/45117524/bios-mo...miloml.exe

Test it and tell me the result Wink

DaveH · 12-09-2011, 07:03 PM

Testing right now, THANKS SO MUCH! Big Grin

**camiloml** · 12-09-2011, 07:18 PM

If it works fine for you a donation is also welcomed Smile

DaveH · 12-09-2011, 07:33 PM

So I ran the file and on startup, the bios message says: Bios update failed.
No brick though. Strange :/ Tried it over and over, still nothing.

**camiloml** · 12-10-2011, 05:56 AM

Remove/rename HP_TOOLS partition then try to flash the mod again, and READ THE STICKY THREADS, all is explained there.

DaveH · (This post was last modified: 12-10-2011, 08:05 PM by DaveH.)

Hi Camilo. Turns out I forgot to reboot after deleting HP_TOOLS and now I have bios corruption. Luckily I am still under warranty so HP will fix it for me. I'll update you all in about a week when my laptop comes back repaired.
However I have another question/ After deleting HP_TOOLS and reboot and flashing bios, will my computer brick when HP_TOOLS is installed again? I kind of want the HP_TOOLS partition...

**camiloml** · 12-11-2011, 05:15 AM

You can fix yourself with an usb pendrive, no need send to hp to repair

DaveH · 12-11-2011, 03:41 PM

Yea I tried that but it didn't work. Thanks for replying. Oh and which options did you unlock?

**camiloml** · 12-12-2011, 04:50 AM

Where did you get the .BIn and .SIG files you need for the recovery process?

Where did you get all the files needed in the pendrive for the recovery process to work?

Did you label the pendrive HP_TOOLS after formatting it FAT or FAT32?

Was the pendrive 2Gb or less capacity?

Login
Username:
Password:	Lost Password?
	Remember me