09-30-2012, 01:25 PM
(This post was last modified: 09-30-2012, 04:26 PM by alkemist_id.)
Hey guys,
So with lots of searching to no avail, I have been unable to come up with a solution to my problem. I have installed a new OCZ vertex 4 128GB SSD in my laptop but I keep getting a hard drive error when it boots up. I can successfully boot up into windows by choosing to boot from CD/DVD then just let it count down and it will boot up into windows and the computer works fine.
I have read that it may be because my bios setting for the SATA ports is set to IDE and it needs to be switched to AHCI but I don't have access to these options in my bios as it is very limited.
laptop model: Pavilion DV6-6020ca
Bios: Insyde H20 rev 3.5
Version: F. 21
Link: http://ftp.hp.com/pub/softpaq/sp54501-55000/sp54724.exe
Any lead in the right direction to resolving my issue would be greatly appreciated!!
Thanks in advance for your help.
btw cannot load photos of bios
The file upload failed. Please choose a valid file and try again. Error details: The attachment could not be found on the server
So with lots of searching to no avail, I have been unable to come up with a solution to my problem. I have installed a new OCZ vertex 4 128GB SSD in my laptop but I keep getting a hard drive error when it boots up. I can successfully boot up into windows by choosing to boot from CD/DVD then just let it count down and it will boot up into windows and the computer works fine.
I have read that it may be because my bios setting for the SATA ports is set to IDE and it needs to be switched to AHCI but I don't have access to these options in my bios as it is very limited.
laptop model: Pavilion DV6-6020ca
Bios: Insyde H20 rev 3.5
Version: F. 21
Link: http://ftp.hp.com/pub/softpaq/sp54501-55000/sp54724.exe
Any lead in the right direction to resolving my issue would be greatly appreciated!!
Thanks in advance for your help.
btw cannot load photos of bios
The file upload failed. Please choose a valid file and try again. Error details: The attachment could not be found on the server