08-21-2020, 10:47 AM
(This post was last modified: 08-21-2020, 10:57 AM by williamsharma.)
Long story short, I have been facing issues with the RAM in my external slot on my laptop. The ram does not get detected, and when I reset the bios by F9 multiple times, one time my entire 8gb RAM shows up else only the integrated 4gb motherboard ram gets detected. First I diagonsed this issue to maybe a faulty stick and bought a new Crucial stick, but it worked perfectly after the first insert and didn't work after, but both my old and new RAM's are detected by CPU-Z spd tab. Now, my RAM port pins could be faulty, but whenever I get the 8gb entire ram it's after a BIOS reset and I'm [censored] sure something is wrong with BIOS. I want to get the memory remap option in my BIOS if that's possible. Or if you could suggest me something for this fix, I have tried backflashing bios as well but it was all in vain.
BIOS version: 4WCN46WW
probably INSYDE 5.0, not sure though.
I don't know how to take a BIOS dump, any link would be appreciated, I tried some software (AFUWIN) but none worked. It's giving me error 10 and error 46 -error getting flash information, I ran as admin.
Also, can I even flash a bios just by using the exe like Lenovo official does?
BIOS version: 4WCN46WW
probably INSYDE 5.0, not sure though.
I don't know how to take a BIOS dump, any link would be appreciated, I tried some software (AFUWIN) but none worked. It's giving me error 10 and error 46 -error getting flash information, I ran as admin.
Also, can I even flash a bios just by using the exe like Lenovo official does?