ECS P4M890T-M: Support for Q6600 & E7500

[Zambezy76rus]

There is a Board on the same Elitegroup p4m890t-m rev 1.0 chipset ... I want to make the Core 2 quad Q6600 (Slacr) 95w processor work on it . The processor is detected,allows you to enter the bios,but freezes at the system boot stage (black screen and flashing white cursor) ... Is it possible to fix this in a modified BIOS?

[DeathBringer]

Post a screenshot of third (Mainboard) tab of CPU-Z.
Make a photo of BIOS page with CPU information with your Q6600 installed.

[Zambezy76rus]

Post a This is how the core2duo e7500 (wolfdale) series processor is defined on this motherboard. Unfortunately, to press "Y" or "N" in the main boot screen, you need to have a PS/2 keyboard that I don't have only USBscreenshot of third

[Zambezy76rus]

As an experiment, I filled in the P4m890T-M(v1.0) BIOS from P4m900T-M(v1.0) (like the boards are very similar, although the latter has unofficial support for Xeon/Quad) -The result : a black screen ,judging by the post card hanging on the post D1

[DeathBringer]

I still need a screenshot of third (Mainboard) tab of CPU-Z.

[Zambezy76rus]

Unfortunately ,this motherboard with this processor does not start Windows, and periodically hangs on the initialization of controllers...

[DeathBringer]

You need to use supported CPU.

[Zambezy76rus]

Мне все еще нужен скриншот третьей вкладки (Mainboard) CPU-Z.
Done!

[DeathBringer]

At first you need to update BIOS to 070808 version and check with Q6600 and E7500 again.

[Zambezy76rus]

At first you need to update BIOS to 070808 version and check with Q6600 and E7500 again.

Updated the BIOS to the latest official version. Unfortunately that didn't help either((((