[Request] Adding 7th Gen CPU support to Fujitsu D3401-A1

[xDJoelDx]

Hi, I have a Fujitsu Esprimo D756 with an D3401-A1 mainboard. Unfortunately it officially only supports 6th Gen Skylake CPUs. I have an Core i3-7100 laying around, which I would love to use in that system. At the moment there is an Intel Pentium G4400 CPU in there.

There is apparently another very similar mainboard with 7th Gen CPU Support. The Fujitsu D3401-B2. Here is the datasheet for it: https://cdn-reichelt.de/documents/datenb..._DB_EN.pdf
Unfortunately there seems to be no datasheet for my D3401-A(1) board.

Original BIOS files for both D3401-A(1) and D3401-B2 are available on https://ftp.kontron.com/main.html
Login: anonymous
Pw: 
Location: /Products/Motherboards/EoL_Motherboards/EoL_ClassicDesktop/D34xx/D3401_D3402-A_D3417-A/BIOS_D3401_D3402-A_D3417-A

I already made a BIOS dump of mine using a CH341A programmer.
Just renaming the BIOS file from D3401-B2 and using DOSflash unfortunately doesn't work.
CPU-Z Screenshots of currently installed Hardware are attached as well.

I hope there is some way to make 7th gen work in that machine

[DeathBringer]

Just truncate D3401-B2.UPD to 16384 KB and flash by a hardware programmer.

[xDJoelDx]

Thanks for your quick answer :) Just how is the correct way to truncate the file?
If I use truncate under linux and then compare the file to the untouched file in a hex editor, there is still quite a bit data being cut off at the end of the file. The command I used was this one:

Code:

truncate D3401-B2.UPD -s 16777216

[DeathBringer]

That's OK.

[xDJoelDx]

Thank you very much! It seems to work perfectly  

[StancuFlorin]

Hi xDJoelDx,

I want to do the same thing for a D3401 B12 motherboard.

Can you tell me how did you flashed the new bios? It is working the normal way using the USB stick with FreeDOS?

Thanks!