Acer Aspire 2930Z v1.17 Acer 2.1 SLIC

[tung8899]

SLIC 2.1 for Acer Aspire 2930Z
Request for SLIC 2.1 for Win 7

-Manufacturer: Acer
-Motherboard Model: Aspire 2930Z
-Bios revision: V1.17
-Bios Type: Insyde
-Bios Download Link: http://global-download.acer.com/GDFiles/...2289499609
-RW Everything Report Download Link: http://www.sendspace.com/file/m82xix

Need Bios SLIC V2.1 for Windows7, Thanks a lot.

[1234s282]

Here you go , i used Acer 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Acer%20As...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[tung8899]

Here you go , i used Acer 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Acer%20As...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Thanks for your kindly assist,
but sorry to tell you that the bios does not work
check with EVEREST, it still SLIC 2.0
and windows 7 cannot activative

[1234s282]

http://dl.dropbox.com/u/747181/SLIC_Dump_ToolKit.EXE

please post screnshots of all 4 tabs

Regards
Admin

[tung8899]

http://dl.dropbox.com/u/747181/SLIC_Dump_ToolKit.EXE

please post screnshots of all 4 tabs

Regards
Admin

Thanks you again, below is the screnshots
Regards

[1234s282]

Theres a problem with your RW Report. Looks like you have part Acer SlIc and some HP SLIc in there too! (HPQOEMSLIC-MPC)

Please can you flash the original bios from Acer , then make a new RW report. We will then attempt to re mod the bios

Regards
Admin

[tung8899]

Theres a problem with your RW Report. Looks like you have part Acer SlIc and some HP SLIc in there too! (HPQOEMSLIC-MPC)

Please can you flash the original bios from Acer , then make a new RW report. We will then attempt to re mod the bios

Regards
Admin

You are right, it is my mistake that I already using a software activative on the windows 7, below is the clean rw file.

http://www.sendspace.com/file/d8fqy3

Sorry for my mistake and thanks you again.

[1234s282]

Uninstall All Software Alternatives Before Flashing!

Now Download the Mod Once More!

Good Luck!

Admin

[tung8899]

Uninstall All Software Alternatives Before Flashing!

Now Download the Mod Once More!

Good Luck!

Admin

It work, thanks you very much.

Best Regards

[1234s282]

Glad we got there in the end

Admin