Acer Aspire V7 582PG

[Ethos]

no bios is from website .. http://www.acer.co.uk/ac/en/GB/content/drivers
anyway ive checked bios for 582PG and 482PG are same

Try flash bios mod by fjfc

but his procedure is not clear
there is file ZRQ.fd so i copied it into flash drive .. should put something else to usb drive ? and should i leave usb bootable or i need to format it ?
because i unpacked that original bios file ZRQ_225.exe
and there is no file with extension fd

[felipejfc]

no bios is from website .. http://www.acer.co.uk/ac/en/GB/content/drivers
anyway ive checked bios for 582PG and 482PG are same

Try flash bios mod by fjfc

but his procedure is not clear
there is file ZRQ.fd so i copied it into flash drive .. should put something else to usb drive ? and should i leave usb bootable or i need to format it ?
because i unpacked that original bios file ZRQ_225.exe
and there is no file with extension fd

https://hostr.co/5DM3mruoNwjb

Follow instructions.txt, the fd file is inside this file as well

Format the USB, only need the file I told, the ZRQ.fd, don't need to be bootable usb
Proceed with recovery flash instructions from the link I put in the txt

Upon success don't go messing on video settings if you are not [censored] sure of what you're doing as it can brick ur notebook, don't try to disable IGD if ur notebook is Muxless for example

[Ethos]

I formated usb drive i copied that downl. file pressed and holded down fn and esc then pressed power then the blue light with bulb icon started flashing and nothing happened for about 10 minutes..
Do I have to rename file to ICL50HW.fd ?

[felipejfc]

NO brohter, NO, you are getting me WRONG!
PUT THE FD FILE THAT IS IN ZIP I SENT YOU ZRQ.fd into the pen stick, no need to rename it!
And then follow with the rest of the procedure...
And it HAS TO BE the file I send to you, the 4MB one.

[Ethos]

NO brohter, NO, you are getting me WRONG!
PUT THE FD FILE THAT IS IN ZIP I SENT YOU ZRQ.fd into the pen stick, no need to rename it!
And then follow with the rest of the procedure...
And it HAS TO BE the file I send to you, the 4MB one.

I unzipped zip file i put 4MB file into usb stick followed instr. led started flashing again i left it flashing for 5 minutes - nothing changed ..

[felipejfc]

Only black scren? pen stick blinks? any beeps?
Pen stick may only contain the file named ZRQ.fd

[Ethos]

Only black scren? pen stick blinks? any beeps?
Pen stick may only contain the file named ZRQ.fd

Yes i formated pen fat 32 the 4mb file was in there .. my usb key has no any led it is slim usb flash drive no beep .. just led on the laptop (left) was blinking like waiting for something..

[felipejfc]

Only black scren? pen stick blinks? any beeps?
Pen stick may only contain the file named ZRQ.fd

Yes i formated pen fat 32 the 4mb file was in there .. my usb key has no any led it is slim usb flash drive no beep .. just led on the laptop (left) was blinking like waiting for something..
pic below

The procedure is to be made with the notebook turned OFF! Read the instructions properly friend...

[Ethos]

Only black scren? pen stick blinks? any beeps?
Pen stick may only contain the file named ZRQ.fd

Yes i formated pen fat 32 the 4mb file was in there .. my usb key has no any led it is slim usb flash drive no beep .. just led on the laptop (left) was blinking like waiting for something..
pic below

The procedure is to be made with the notebook turned OFF! Read the instructions properly friend...

maan I DID turn laptop off ! screen is black and led is slowly flashing

[felipejfc]

Well, if you did it well, put the file with the right name into pen stick, entered recoveyr mode but no flash into the EEPROM, this mod can't be done.
Only if you flash it directly to the EEPROM using a external EEPROM programmer, if you are interested on how, I can explain but this would need some hardware knowledge