Asus A8N-E 1013 HP 2.1 SLIC

[JasonP]

Manufacturer: ASUS
-Motherboard Model: A8N-E
-Bios version: 1013
-Bios Brand: Phoenix
-Bios Type: Award
-Bios Download Link: http://dlsvr01.asus.com/pub/ASUS/mb/sock...NE1013.zip
-Bios Download Link: http://dlsvr02.asus.com/pub/ASUS/mb/sock...NE1013.zip
-Bios Download Link: http://dlsvr03.asus.com/pub/ASUS/mb/sock...NE1013.zip

Hoping for SLIC 2.1 if possible

Thanks in advance!

[1234s282]

Here you are , HP SLIC 2.1

http://files.getdropbox.com/u/747181/Asu...34s282.zip

Flash At Your Own Risk!

Regards
Admin

[JasonP]

Thanks a lot! I'll try it later today!

[JasonP]

Here you are , HP SLIC 2.1

http://files.getdropbox.com/u/747181/Asu...34s282.zip

Flash At Your Own Risk!

Regards
Admin

Flashing worked nicely. Have yet to try to install W7. Didn't have the time today, but where do I check to see if the SLIC 2.1 is as it should be? Could Everest tell if the SLIC is HP and 2.1? If so, where? Or is there any other util that could view the SLIC? I.e, is there any place I could see that it says "HP" SLIC? I'm new at this, so I'm just asking None of the CPI tables says SLIC after flashing with your posted bios.

I've looked with the RW-Everything Read & Write utility and under ACPI, there no tab called SLIC.

[1234s282]

Id wait till you install win 7 , try the certificate and key , then see what happens.

Remember , Windows 7 isnt officialy out yet , so Everest / RW everything software etc may not be designed to support SLIC 2.1 yet

Regards
Admin

[JasonP]

Id wait till you install win 7 , try the certificate and key , then see what happens.

Remember , Windows 7 isnt officialy out yet , so Everest / RW everything software etc may not be designed to support SLIC 2.1 yet

Regards
Admin

Thanks! I'll do that this weekend. Would have tried today, but Metallica Concert ranks a bit higher than Windows 7 today

Btw, I only have SLIC 2.0 HP cert. Is there any newer (2.1 cert) out? I've heard the 2.0 cert should work.

[1234s282]

No 2.1 Certs released yet , and probably wont be until you can buy it on new oem pcs

Yes , theres a lot of people on here that have reported successful activation using my HP 2.1 SLIC mod , the leakaed ultimate key and HP 2.0 vista cert

Regards
Admin

[venky_kr]

Working just fine here
Thanks a lot

[JasonP]

Just installed Windows 7 here too. Activated successfully using 7loader rel. 5 (activate with slic present and chose HP cert.).
SLIC bios mod seemed to be working prefectly! Thanks!!

[krackpot]

Thanks for the mod!

Just wondering if anyone who has patched their BIOS, flashed within Windows or did it old school through DOS?