Asus Rampage III Gene OROM Mod

[d4ftpuNK]

UPDATED 20/04/13: Released ZioMod 1003_S10 with new Intel SATA/Raid module v12.6.0.1867 (and also Intel network module 1.4.10)!!! Download it HERE.

Awesome brother! Thank you very much. You're the best

[sebgernf]

Any chance for s15 version of this mod for Rampage III Gene?

[WangChung]

Hello! Are you still supporting updates to this board? I have an older BIOS that's a bit of a soup sandwich (from here: CLICKY). It would be great if I could get everything updated since Asus abandoned support...

Thanks for your help!

*EDIT* BTW, this worked perfectly! Hope there's more to come!

UPDATED 20/04/13: Released ZioMod 1003_S10 with new Intel SATA/Raid module v12.6.0.1867 (and also Intel network module 1.4.10)!!! Download it HERE.

[WangChung]

Sent this in a PM too
Hello,
Could you help me/us with an update for the R3G board? The last update we have was the 1003_S10 BIOS. I'm well aware that you sold your R3E board, and aware of the risks to flashing a modded BIOS.
I'm not sure if the Marvell 2.3.1055 firmware is valid for the controller, but I know the Intel OROM is at v13.5.0.2118
Thank you for helping!

[sebger82]

I have prepared a modified version of the BIOS for this motherboard. I have used this versions:
- Intel RST (s) RAID ROM v13.5.0.2164 with TRIM support
- Intel 82567V-2 Gigabit Network: v1.5.13


If you would like to test at home and see if everything is working properly, give me your email address via PM. I'll send you the file. I don't have this motherboard anymore, I can't test bios myself.

[nicke85]

any newer bios update for Rampage III Gene ? Warm regards

[pir8man]

any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.

[Torpis]

any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.

Took the plunge and flashed the S18T version and it seems to be working fine, thank you very much!

[pir8man]

Took the plunge and flashed the S18T version and it seems to be working fine, thank you very much!

awesome news.  were you able to test all 3 updated OROM?   (intel SATA, Marvell SATA, and NIC)

[Torpis]

Intel SATA and NIC working fine, I don't use the SATA3 due to the fact its slower than the SATA2 on this board (unless the new bios fixes that).