Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
Oldie: Dell Inspiron 545: redux?
Last Post: irq5
Today 03:24 PM
» Replies: 0
» Views: 28
an adding of the ASUS CT-479 support for...
Last Post: Rabik
Today 12:59 PM
» Replies: 4
» Views: 194
[REQUEST] MSI X79A-GD65 - Add support fo...
Last Post: iaval
Today 12:11 PM
» Replies: 0
» Views: 36
HP Zbook G7 POST password removal
Last Post: Kruba
Today 06:56 AM
» Replies: 0
» Views: 57
[Request] Acer Aspire X3200 (DA078L / nF...
Last Post: Canhao
Today 04:16 AM
» Replies: 6
» Views: 133
[REQUEST] HP EliteBook 840 G3 Whitelist ...
Last Post: Max Peet
Yesterday 03:09 PM
» Replies: 2
» Views: 5946
[REQUEST] Lenovo G710 BIOS Whitelist Rem...
Last Post: Znixz12
Yesterday 02:30 PM
» Replies: 508
» Views: 345673
[REQUEST] Dell Wyse 3040: CSM enable for...
Last Post: mm400
Yesterday 12:00 PM
» Replies: 3
» Views: 4105
Thinkpad e460 whitelist removal
Last Post: JohnBen
11-15-2026 10:18 PM
» Replies: 0
» Views: 101
[REQUEST] Lenovo G580 (5ECNxxWW) Whiteli...
Last Post: Alex'sShtormXXX
11-15-2026 01:40 PM
» Replies: 1738
» Views: 1252303
[REQUEST] Lenovo Ideapad Z710 (7FCNxxWW)...
Last Post: Dudu2002
11-15-2026 01:28 PM
» Replies: 232
» Views: 217296
[Unlocked AHCI, sp53872] HP Pavilion g6-...
Last Post: bryan26i
11-15-2026 01:13 AM
» Replies: 14
» Views: 22355
[REQUEST] Lenovo IdeaPad Gaming 3 15IMH0...
Last Post: leoramoners
11-12-2026 07:09 AM
» Replies: 67
» Views: 62020
[REQUEST]
Last Post: Skimpa
11-10-2026 04:20 PM
» Replies: 0
» Views: 359
[REQUEST] Sony VAIO SVE151 & SVE171 Seri...
Last Post: ryan13213545345
11-09-2026 05:36 PM
» Replies: 61
» Views: 54100
Lenovo M90p Xeon Support + Question
Last Post: bmb021
11-08-2026 12:23 PM
» Replies: 23
» Views: 5944
[REQUEST] Acer Nitro 5 AN515-54 BIOS Unl...
Last Post: Dudu2002
11-08-2026 10:13 AM
» Replies: 150
» Views: 139975
[REQUEST] Lenovo IdeaPad S210 (80CNxxWW)...
Last Post: Dudu2002
11-08-2026 10:12 AM
» Replies: 46
» Views: 32068
[REQUEST] HP Elitebook 8440p Whitelist R...
Last Post: mooms2
11-07-2026 01:17 PM
» Replies: 76
» Views: 68151
Lenovo M90q Gen 3 LGA1700 Support
Last Post: DeathBringer
11-06-2026 01:41 AM
» Replies: 3
» Views: 705

Asus Rampage III Gene OROM Mod
#21
(02-03-2016, 02:01 AM)Torpis Wrote: Intel SATA and NIC working fine, I don't use the SATA3 due to the fact its slower than the SATA2 on this board (unless the new bios fixes that).

the new firmware does not make the Marvel chip any faster.  The Marvell SATA3 is a first gen chip and falls short when working with faster SSD drives.  But for standard platter/rotational drives, the Marvel chip is plenty fast.  I personally get better benchmarks on my WD Black drives via the Marvell controller over the Intel. For SSD, yes.. you are better off using the Intel SATA2 ports.
find
quote
#22
Yeah I didn't think it would due to the 1x PCI-e lane, I didn't know about the platter drive though so might be moving my HDD over onto that controller.
find
quote
#23
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

thank you pir8man for bios update, currently don't have any 1366 cpu
have been tried to sell pc in parts but have still R3G and now when X58 is not dead platform have been ordered X5690.
Hope it will work. Regards
find
quote
#24
The X56xx brothers have QPI path enabled to talk to 2nd cpu. Which is useless on this board, the W36xx lineup is cheaper and better suited. I just installed W3680 on my R3E and it's a dream! I highly recommend the XEON W3670 or W3680 for these boards. Both are great bang for the buck and overclock well.
find
quote
#25
Thumbs Up 
(02-12-2016, 11:33 PM)pir8man Wrote: The X56xx brothers have QPI path enabled to talk to 2nd cpu. Which is useless on this board, the W36xx lineup is cheaper and better suited. I just installed W3680 on my R3E and it's a dream! I highly recommend the XEON W3670 or W3680 for these boards. Both are great bang for the buck and overclock well.

I have got W3690 for my R3G and have tested it with lastest bios update.
It seems that it work perfect!
thank you pir8man
find
quote
#26
I really appreciate this forum! great work! i'm at the moment using the ZioMod 1003_S10 bios version on my Rampage III Gene, and it works smoothly!! Smile
I'm just wondering if there any chance to get bluetooth (from usb dongle or pcie board) working on post, to access bios with wireless keyboard, through a bios mod... please don't get angry is i've said a kind of bullsh1t.. i'm not an expert at all! Big Grin
find
quote
#27
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?
find
quote
#28
(06-27-2016, 08:35 PM)PrestonYoungsley Wrote:
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?

That has nothing to do with the Board or BIOS version.  That is because you are running an ES (Engineering Sample) CPU.  These always appear as ID 000, so that they are not confused with retail versions of the same processor.  I had the same on my i7-965 (ES), the problem disappeared when I upgraded to a retail XEON CPU.
find
quote
#29
https://mega.nz/#!YjIAEJLS!DS0X72LcI1p5x...ahSb4fgckM

s18t version with updated cpu microcode. No changes at all, but if someone wants to flash, you have a chance right now.
find
quote
#30
(06-27-2016, 08:35 PM)PrestonYoungsley Wrote:
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?

2d performance booster should be disabled in the bios.
find
quote


Forum Jump:


Users browsing this thread: 4 Guest(s)