Clevo P775TM1-G BIOS

[Thro]

I tried that, created the bootable usb, and in the instructions it says to type flash.bat, hit enter, but this doesn't work

[feluchi]

I tried that, created the bootable usb, and in the instructions it says to type flash.bat, hit enter, but this doesn't work

You don't need to create bootable USB flash drive. You can flash in Windows. As first step, run WMeset.exe , laptop will automatically reboot, then run FlashMeWinX64.bat

[Thro]

Is the Clevo BIOS unlocked? All overclock settings available?

[feluchi]

Is the Clevo BIOS unlocked? All overclock settings available?

You can try it.

[Thro]

I tried, ran WMeset, machine restarts with fans at 100%, then when I run FlashMeWinx64.bat, it does nothing. I checked the error.log, it says:
"Error 366: Fail to load driver (PCI access for Windows).
Tool needs to run with an administrator privilege account."
I only have one account on my machine, which is admin. Any ideas?
Really appreciate all your help!

[feluchi]

I tried, ran WMeset, machine restarts with fans at 100%, then when I run FlashMeWinx64.bat, it does nothing. I checked the error.log, it says:
"Error 366: Fail to load driver (PCI access for Windows).
Tool needs to run with an administrator privilege account."
I only have one account on my machine, which is admin. Any ideas?
Really appreciate all your help!

Run  FlashMeWinx64.bat as Administrator (right click mouse, choice "Run as Administrator").

[Thro]

I did, still doesn't work

[Maxinator500]

I did, still doesn't work

Here is a repack with getting privileges via Windows UAC: P7xxTM1(G)-Bios-R1.07.29.zip.

[dajimbo]

Hello, I have a P570WM with good Mod Bios.
Now I have bought a P775TM1G and I´m interested in 128GB RAM and 9900KS.
Is this possible with version 1.07.29 from here?

[the jg89]

Hey
I have a P775 tm1g laptop with a gtx 1080 and a i7 8700k
I tried to swap out a gtx 1080 with an rtx 2080 mxm but it read as "microsoft basic display adapter"
Couldn't even install new graphics drivers since it said it couldn't find graphics hardware even though it was working
on another laptop.

I heard that you need a bios update for it to become recognizable but I'm stumped on how to install them
I know you get it from here :https://my.hidrive.com/share/yze8mg-wf8#$/BIOS%20and%20EC%20Firmware/CLEVO/P_Series/P7xx_Series/P7xxTMx/P7xxTM1%28G%29

but I'm not sure how you go about doing it
and how do I make a back up of my current bios?
also if I accidently brick my pc, where on the mother board is the bios reset switch?

Sorry this was long ^_^'
needed as much info as possible

My bios is :

bios version : 1.05.11
KBC/EC Firmware Revision : 1.05.07

Stumbled onto this video for those who want to install dsanke's bios for this laptop, obviously go for rtx0729 lol

https://www.youtube.com/watch?v=LaoY6jSj9Y0