|
Welcome
|
You have to register before you can post on our site.
|
|
|
Compal/LAM EL80/HEL80 122b Phoenix bios hidden options unlock request
|
Posts: 1,237
Threads: 17
Joined: Mar 2011
Reputation:
51
i can completely unlock the frequency ratio for you but you should knew some things to take the responsibility for using this option :-
- in your bios ( or any phoenix bios which contains frequency options ) the frequency ratio option has some routines which checks your cpu ID and type and see what options are supported then it decides to show the option or hide it .
- so this means that your cpu don`t support overclocking OR the option is just hidden and work properly after unlocking.
- i just linked the option to the main menu but didn`t adjust the routines to see if the cpu support it .
read this carefully and tell me if you want to unlock it and i will mod it now if you want .
"Many of life's failures are people who did not realize how close they were to success when they gave up." 
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
(08-10-2011, 04:34 PM)AHMED HOSSAM Wrote: i can completely unlock the frequency ratio for you but you should knew some things to take the responsibility for using this option :-
- in your bios ( or any phoenix bios which contains frequency options ) the frequency ratio option has some routines which checks your cpu ID and type and see what options are supported then it decides to show the option or hide it .
- so this means that your cpu don`t support overclocking OR the option is just hidden and work properly after unlocking.
- i just linked the option to the main menu but didn`t adjust the routines to see if the cpu support it .
read this carefully and tell me if you want to unlock it and i will mod it now if you want .
okay, that means that it maybe works with my processor , maybe not , right ?
my processor model is Intel Core2Duo T5600 (dunno if it supported)
i would be glad if you can unlock it, but, what can it do then ? (i know that when i put multiplier over the original one , in that case over x11, then it starts to produce more heat, and unstability, but then helps voltmod 
correct me if i'm wrong.
Posts: 1,237
Threads: 17
Joined: Mar 2011
Reputation:
51
May be when you try setting the multiplier to 12 the notebook didn`t boot , then you will need to just remove the CMOS battery for about 10 to 20 minutes and put it again .......then it will boot normally .
concerning the voltage mod , i have read about this but haven`t tried it before ,,,,,,,,,,,also i will not try this for first time in your notebook as it might brick the CPU .
i will unlock the option for you but becareful with it.
"Many of life's failures are people who did not realize how close they were to success when they gave up."
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
(08-10-2011, 05:56 PM)AHMED HOSSAM Wrote: May be when you try setting the multiplier to 12 the notebook didn`t boot , then you will need to just remove the CMOS battery for about 10 to 20 minutes and put it again .......then it will boot normally .
concerning the voltage mod , i have read about this but haven`t tried it before ,,,,,,,,,,,also i will not try this for first time in your notebook as it might brick the CPU .
i will unlock the option for you but becareful with it.
ok,
but , just asking, do you basically can make voltage setting available?
(thinking , that when multiplier OC works, then, why not to try voltage  )
Posts: 1,237
Threads: 17
Joined: Mar 2011
Reputation:
51
HERE IS YOUR UNLOCKED BIOS , TELL ME IF THIS WORKED.
BIOS2.rar (Size: 1.12 MB / Downloads: 32)
-no voltage setting hidden in your bios , i will just edit ACPI table to change the cpu voltage and the trip point for fan ..........but i hadn`t time for doing this so it will be the first time and i don`t want to brick your notebook so i will not mod the voltage .
- first, check if the frequency ratio works or not then think about voltage .
"Many of life's failures are people who did not realize how close they were to success when they gave up."
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
08-10-2011, 07:03 PM
(This post was last modified: 08-10-2011, 07:04 PM by hani93.)
(08-10-2011, 06:48 PM)AHMED HOSSAM Wrote: HERE IS YOUR UNLOCKED BIOS , TELL ME IF THIS WORKED.
-no voltage setting hidden in your bios , i will just edit ACPI table to change the cpu voltage and the trip point for fan ..........but i hadn`t time for doing this so it will be the first time and i don`t want to brick your notebook so i will not mod the voltage .
- first, check if the frequency ratio works or not then think about voltage .
  same black screen when i try to enter into bios (F2 key)
probably it's not supported then.
BUT , BIG THANKS FOR TRYING !!!!
Posts: 1,237
Threads: 17
Joined: Mar 2011
Reputation:
51
OK , flash back to the working modified one and i will look deeply into this tomorrow and upload another version .
"Many of life's failures are people who did not realize how close they were to success when they gave up."
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
(08-10-2011, 07:06 PM)AHMED HOSSAM Wrote: OK , flash back to the working modified one and i will look deeply into this tomorrow and upload another version .
Thank You!  
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
Posts: 38
Threads: 2
Joined: Jul 2011
Reputation:
0
little bump
|
Users browsing this thread: 1 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")