Login

**AHMED HOSSAM** · 08-26-2011, 06:28 PM

just rename the modified file and do a blind recovery then see the result .
i will wait your reply .

**barcode** · 08-26-2011, 06:32 PM

(08-26-2011, 06:28 PM)AHMED HOSSAM Wrote: just rename the modified file and do a blind recovery then see the result .
i will wait your reply .

Just did it via blind recovery NO detection again!

**AHMED HOSSAM** · (This post was last modified: 08-26-2011, 06:50 PM by AHMED HOSSAM.)

ok , just wait and i will upload another mod now.......................now try blind recovery to A02 not A03

Have you made the blind recovery to A02 !

**barcode** · (This post was last modified: 08-26-2011, 07:24 PM by barcode.)

(08-26-2011, 06:45 PM)AHMED HOSSAM Wrote: ok , just wait and i will upload another mod now.......................now try blind recovery to A02 not A03
Have you made the blind recovery to A02 !

Yes this is what im at now blind to A02, Im not using A03 at all an throttle still there

**AHMED HOSSAM** · (This post was last modified: 08-26-2011, 07:31 PM by AHMED HOSSAM.)

throttle is still found too !

ok , i will upload another modified one now but it will be A02

**barcode** · (This post was last modified: 08-26-2011, 08:06 PM by barcode.)

(08-26-2011, 07:24 PM)AHMED HOSSAM Wrote: throttle is still found too !
ok , i will upload another modified one now but it will be A02

LET ME TEST THE A02! MAYBE SUCCESS

Yes as far as i can tell, im only using 3dvantage to test but my temps dont no pass 66c i heard 3dvantage is slowed by nvidia.

What are ppl using to test for throttle? I do some research here on the best program to test for throttle.

In the meantime throw A02 over for testing as well

**AHMED HOSSAM** · 08-26-2011, 08:12 PM

You can use furmark for testing the throttle .
also , what was the throttle temp before you start flashing the modified bioses , was it below 66 !!

**barcode** · (This post was last modified: 08-26-2011, 08:26 PM by barcode.)

(08-26-2011, 08:12 PM)AHMED HOSSAM Wrote: You can use furmark for testing the throttle .
also , what was the throttle temp before you start flashing the modified bioses , was it below 66 !!

No the temp was always around 73 before throttle kicked in. The test i just did was from cold boot so the temp never passed 66 and throttle was detected at that temp which now make me suggest that it could be a power issue not so much temp.
Please note i am using the modded 0.92v gpu standard was 0.87v

Extracted from Nvidia website
Furmark is an application designed to stress the GPU by maximizing power draw well beyond any real world application or game. In some cases, this could lead to slowdown of the graphics card due to hitting over-temperature or over-current protection mechanisms. These protection mechanisms are designed to ensure the safe operation of the graphics card. Using Furmark or other applications to disable these protection mechanisms can result in permanent damage to the graphics card and void the manufacturer's warranty.

**AHMED HOSSAM** · 08-26-2011, 08:28 PM

the ALIENWARE 17XR3 users had used furmark with the 580M GPU to test throttle and they reported the results , i think the furmark is safe .....i just need to knew the throttle temp using a trusted application like the furmark .

**barcode** · 08-26-2011, 08:31 PM

(08-26-2011, 08:28 PM)AHMED HOSSAM Wrote: the ALIENWARE 17XR3 users had used furmark with the 580M GPU to test throttle and they reported the results , i think the furmark is safe .....i just need to knew the throttle temp using a trusted application like the furmark .

Its 79/80 SET BY DELL - Nvidia own card limit is slighly higher for saftey of course, but Dell's set this in the bios way to early

Login
Username:
Password:	Lost Password?
	Remember me