Dell D630C A11 Dell 2.1 SLIC

[geek_on_line_1]

Hi,

I would like to request the following bios for Latitude D630cbe upgraded to SLIC 2.1

Manufacturer: Dell
Model: Dell Latitude D630c
Bios revision: A11
Bios Type: Phoenix BIOS
Bios Download Link: http://ftp.us.dell.com/bios/D630CA11.EXE


thanks.

[1234s282]

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20La...34s282.ZIP

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[geek_on_line_1]

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20La...34s282.ZIP

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Just a quick question....

At what stage should I flash the bios with the new slic version included in the zip file?

[1234s282]

Thats the first step

then follow the posted instructions AFTER you have flashed the SLIC Bios

Regards
Admin

[geek_on_line_1]

Thats the first step

then follow the posted instructions AFTER you have flashed the SLIC Bios

Regards
Admin

Thanks a lot. The modded bios worked perfectly. I did not need to follow the rest of the steps as I had a dell OEM disk.

[lysinger]

Thats the first step

then follow the posted instructions AFTER you have flashed the SLIC Bios

Regards
Admin

Call me new and dumb (because I am ^_^) but if the first step is to flash the bios, is the second to install the OS?

Or is it install OS and leave the key blank and then flash the bios?

[guidobras]

Hi,
download link is broken, could you please repost it?

Thanks!