Fujitsu D3061-A1 & Xeon E3-1245

[Nikandros]

Hello. I am not sure if i am supposed to open a new request / thread because I have a related question. Is there any bios of this mobo that could support my Sandy Bridge Xeon e3 1245, because rigjht now I get no response, and looking through the net there seems to be a feeling that only i3/i5/i7 Sandy Bridge cpu's are supported. In my case the corresponding one would have been the i7 2600. Yet I am not sure.

[DeathBringer]

Post a screenshot of Mainboard tab of CPU-Z.
Explain exactly what happens when you try to boot with new CPU (Xeon E3-1245).

[Nikandros]

Thanks for the swift answer. Sorry to not having responding earlier but it just happened to be an extremely busy day.
When I had tried to boot with the Xeon the screen was black, the fans were definitely spinning as normal and i do not recall the NUmLock key lighting up. When i tried again the same thing happened.
Now another problem is that i have installed TrueNas and it is not straightforward how to obtain the CPU-Z screenshot . I did try some recommended commands within its own shell, but i do not think that what i get is what you are asking for.
For example, i got :

Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: FUJITSU
Product Name: D3061-A1
Version: S26361-D3061-A1
Serial Number: B2007AB0
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

So please bear with me and i will try to boot from another windows ssd to get the CPU-Z screenshot.
I will then post it as soon as possible. Thanks again.

[DeathBringer]

Download Intel ME System Tools v7
I need results of MEInfo on this system.
P.S. Can you test your Xeon with other motherboard?

[Nikandros]

[Nikandros]

i will get you the other info later today hopefully. And i will check if i can try the xeon on another mobo. Not sure yet.

[Nikandros]

I ran the meinfo command via FreeDOS.

Intel® MEInfo Version: 7.1.50.1166
Copyright© 2005 - 2011, Intel Corporation. All rights reserved.

Intel® ME code versions:

BIOS Version:                          V4.6.4.0 R1.12.0 for D3061-A1x
MEBx Version:                          7.0.0.54
Gbe Version:                            1.3
VendorID:                              8086
PCH Version:                            4
FW Version:                            7.0.10.1203

FW Capabilities:                        19536966

    Intel® Standard Manageability - PRESENT/DISABLED
    Intel® Capability Licensing Service - PRESENT/ENABLED
    Protect Audio Video Path - PRESENT/ENABLED

Intel® Standard Manageability State:  Disabled
CPU Upgrade State:                      Upgrade Capable
Cryptography Support:                  Enabled
Last ME reset reason:                  Power up
Local FWUpdate:                        Enabled
BIOS and GbE Config Lock:              Enabled
Host Read Access to ME:                Disabled
Host Write Access to ME:                Disabled
SPI Flash ID #1:                        C22017
SPI Flash ID VSCC #1:                  20052005
SPI Flash BIOS VSCC:                    20052005
BIOS boot State:                        Post Boot
OEM Id:                                00000000-0000-0000-0000-000000000000
Link Status:                            Link up
System UUID:                            c53043c1-e1b9-e011-a7cb-634246174287
MAC Address:                            00-19-99-ac-42-a4
IPv4 Address:                          0.0.0.0
IPv6 Enablement:                        Disabled
Configuration state:                    Not started
Provisioning Mode:                      PKI
Capability Licensing Service:          Enabled
Capability Licensing Service Status:    Permit info not available
OEM Tag:                                0x00000000

[DeathBringer]

OK. Update BIOS to actual version
Then make new results of MEInfo.

[Nikandros]

Sorry for the wait, I got caught up in some other stuff. I updated the BIOS to the latest one, as per your instructions and i ran the meinfo executable again (in FreeDOS):

Intel® MEInfo Version: 7.1.50.1166
Copyright© 2005 - 2011, Intel Corporation. All rights reserved.

Intel® ME code versions:

BIOS Version: V4.6.4.0 R1.29.0 for D3061-A1x
MEBx Version: 7.0.0.63
Gbe Version: 1.3
VendorID: 8086
PCH Version: 4
FW Version: 7.0.10.1203

FW Capabilities: 19536966

Intel® Standard Manageability - PRESENT/DISABLED
Intel® Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED

Intel® Standard Manageability State: Disabled
CPU Upgrade State: Upgrade Capable
Cryptography Support: Enabled
Last ME reset reason: Power up
Local FWUpdate: Enabled
BIOS and GbE Config Lock: Enabled
Host Read Access to ME: Disabled
Host Write Access to ME: Disabled
SPI Flash ID #1: C22017
SPI Flash ID VSCC #1: 20052005
SPI Flash BIOS VSCC: 20052005
BIOS boot State: Post Boot
OEM Id: 00000000-0000-0000-0000-000000000000
Link Status: Link down
System UUID: c53043c1-e1b9-e011-a7cb-634246174287
MAC Address: 00-19-99-ac-42-a4
IPv4 Address: 0.0.0.0
IPv6 Enablement: Disabled
Configuration state: Not started
Provisioning Mode: PKI
Capability Licensing Service: Enabled
Capability Licensing Service Status: Permit info not available
OEM Tag: 0x00000000

[DeathBringer]

OK. Try to boot with your Xeon E3-1245