GA-EP45T-UD3LR

[Lost_N_BIOS]

Can you see what is changed in this BIOS that it shows/execute 1.6 V for memory? << what??

Yes, X5482 << OK Yes! and check E5450 << There is no check, only do (Says Yoda )

[PitKoz]

OK, I see now in auto mode 1.6v for memory,
And let's add this CPUs >> this you mean about there is no check.
11.xx OROM would be great also.



I like Yoda

[Lost_N_BIOS]

Check actual voltage with HWInfo64 or AIDA64. But, auto can vary depending on current speed, or what's in the SPD

So you want 11.xx orom (11.2.0.1527_TRIM), X5482 + E5450 microcodes. What BIOS do you want these mods in?

[PitKoz]

HWInfo bluescreened my PC, AIDA did not try yet. The voltage I have changed back to 1.5 in Bios Tunning and all works well. with 1.6 V it was not really stable.

[PitKoz]

Asmedia driver is not working with HWI, I made it run and I see no problems with manual voltage change done for memory.

[Lost_N_BIOS]

HWInfo blue screen? Try again, do not change any settings or check any boxes, just run, if it stalls on flushing buffer kill via task manager (Wait for death) then run again and it should run properly.

[PitKoz]

Yes, I did manage to run it. On HWI forum there was direction about Asmedia drivers to replace them with generic.
And it worked.
APP bios version, the 12e or 10 we can test which is better. This two versions for the testing and decide finally.
This BIOS I have now was modified and shows ver 10. but this voltage for RAM is too high so should not be considered.
I think this will be my last attempt to change anything in this PC.
Xmas and my study starting 12 January will stop me from making any "dangerous" action for next year
I have for now too much in RL to be sorted beside all this also.
Thanks in advance and for all before

[Lost_N_BIOS]

Set your own voltage manually for memory! I will make BIOS F10 and F12 for you tonight with (11.2.0.1527_TRIM), X5482 + E5450 microcodes

*Edit - I've already sent you F12e with all mods you wanted
EP45T-UD3LR-F12e-Mod -
Update all CPU microcodes + add 771 specific microcodes
Update Intel RAID Rom from v8.0.0.1039 to v11.2.0.1527
Intel/Realtek PXE PCIe GBE Controller update from v2.33 to v2.63

Do you still need F10 with 11.2 as well? I sent with 11.5 already

[PitKoz]

I have to check all that was before.

[Lost_N_BIOS]

I can make you F10 tonight if you still need with 11.2 + Microcodes, but the 12e I already did, so link here in this thread if you can't find it on your end.