Gigabyte GA-D525TUD [PXE/gPXE]

[Kaicho]

Hi,

I'm the proud owner of a Gigabyte GA-D525TUD
Currently Bios: F3 (Newest version) Award

Currently the PXE part is not functional it will not boot correctly. PXE is working when i use a USB stick and boot gPXE from this.

Some extra info:
Realtek NIC Realtek RTL8111E
| lspci -n -s 01:00.0 01:00.0 0200: 10ec:8168 (rev 06)|

It has Family Controller Series v2.35 installed [PXE]

I tried to patch the bios myself but failed.

My request would be if it is possible to:
A. Patch the newest Realtek version 2.39 or see the attachment

and/or second bios B. Patch it with the gPXE rom for this NIC that I have made from the gPXE source see attachment or here for the TAR

Thanks in advance

[Dansolo]

Two options, one with RPXE 2.39, one with GPXE... both updated JMicron JMB363 OROM to 1.08.01 (which only works sometimes, apparently... but you should be okay without RAID, I think)

I took a look in Modbin and noticed non-selectable RAID-mode but I don't know if it will work with NM10 so I didn't touch it... Does AHCI mode work for you? I don't see a PCI OROM for AHCI...

[Kaicho]

Two options, one with RPXE 2.39, one with GPXE... both updated JMicron JMB363 OROM to 1.08.01 (which only works sometimes, apparently... but you should be okay without RAID, I think)

I took a look in Modbin and noticed non-selectable RAID-mode but I don't know if it will work with NM10 so I didn't touch it... Does AHCI mode work for you? I don't see a PCI OROM for AHCI...

Boths roms work, the gPXE one fixed my issue regarding the network boot setup. It is set to IDE haven't checked AHCI yet, i can try if the RAID solution works if you enable it

[theg33kb0y]

Boths roms work, the gPXE one fixed my issue regarding the network boot setup. It is set to IDE haven't checked AHCI yet, i can try if the RAID solution works if you enable it

Kaicho,

What did you use to flash your 10ec:8168? I have one too (in a TP-Link 3468 card).

I have looked for flashers, but I'm not sure how to load the .ROM. Anything you can help with would be greatly appreciated!