HP H-IG41-uATX 45nm microcode update LGA771/775 verified working

[zfrittz6]

Hi, does anyone know the bios hl41-uatx for xeon x5460

[Chayank Das]

I have this same motherboard..2x2 gb of ram ,one of them is 800mhz and other one is 1333mhz.(i think the faster one downgrade its speed)...anyways,i m currently using intel pentium e5800 dual core but i also have a core 2 quad q8300 but it didnt work...making 1 short beep and 1 long beep....can anyone suggest to solve this problem....thank u??

[sonicman66]

Its works for me here, I had to use another keyboard to make it flash with AMIBOOT.ROM (via first post). But, it did change my ide interface. I can no longer boot from my Windows 10 drive. I had to reinstall from scratch


snakeman

[tiretrak]

---

why 4 Gb modules don't work with core 2 quad ?

[DeathBringer]

---

why 4 Gb modules don't work with core 2 quad ?

https://www.cyberforum.ru/motherboards/t...st14957728

[Krakatoa]

Hi, I can't update using control+home.
I press them but nothing happens

[OthmaneAo]

hi there,
I have a H-IG41-uATX HWrev 1.0 Model 2A8Ch with 5.13 bios

Does 6.10a bios add AHCI support?
EDIT: apparently no you cannot access the 6.10a bios menu and on windows nothing changed, so for me 6.10a has no AHCI.

if i upgrade to 6.10a will i be able to downgrade?
EDIT: afuwin says bios is write protected so i used the ch341a programmer to go back to 5.13 as someone said here.

Thanks for help

[antidot]

Has anyone actually figured out how to get around the BIOS write-protected error?

[goldenhill]

Anyone who still use H-IG41-uATX REV 1.0 .
I had used 5.13 BIOS, and Ctrl + Home key as instructed did not work.

USB boot drive = AFUDOS 4.40 + Eto_610a.ROM, note Eto_610a.ROM file should be located among DOS files, not in the unzipped folder.
" AFUDOS.EXE ETO_610A.ROM /P /B /N /C /X " => Wow !
Refenence : https://www.supermicro.com/support/faqs/...m?faq=8740

[andreyccs89]

¿Alguien que todavía usa H-IG41-uATX REV 1.0?
Yo había usado BIOS 5.13 y la tecla Ctrl + Inicio como se indica no funcionó.

Unidad de arranque USB = AFUDOS 4.40 + Eto_610a.ROM, tenga en cuenta que el archivo Eto_610a.ROM debe estar ubicado entre los archivos DOS, no en la carpeta descomprimida.
"AFUDOS.EXE ETO_610A.ROM /P /B /N /C /X " => ¡Guau!
Referencia: https://www.supermicro.com/support/faqs/...m?faq=8740

funciona para mi.

¿Sabes si el procesador Xeon X5472 es compatible?