HP Pavilion Sleekbook 15-b012ee laptop bios F.1C

[josefsalem]

i need to unlock my HP Pavilion Sleekbook 15-b012ee laptop bios F.1C which i need it for unlocking my bios advanced menu and AHCI which i need these for installing osx on my laptop

here is a link of the bios http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66846.exe

i now use windows 8.1 64 bit

[BDMaster]

here is a link of the bios http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66846.exe

Hi friends,
only and not all sp5xxxx.exe can be modded and sp6xxxx.exe or sp7xxxx.exe only
using an HW SPI Programmer to rewrite Firmware into Eeprom !
So post here an sp5 Bios Update if possible !
Regards

[BDMaster]

Ok I checked all Bioses for this laptop HP Pavilion Sleekbook 15-b012ee and
oldest Bios has date 2012 so not rewritable as RSA Signed Internal Check !
Only using SPI PGM !
Regards

[josefsalem]

Ok I checked all Bioses for this laptop HP Pavilion Sleekbook 15-b012ee and
oldest Bios has date 2012 so not rewritable as RSA Signed Internal Check !
Only using SPI PGM !
Regards

so can you help me please cause i dont understand since im not a pro in computers and i only want to run hackintosh on my laptop

[BDMaster]

Ok friend You nedd the Tools like here (SPI Programmer + Pomona Soic Clip) :

https://www.bios-mods.com/forum/Thread-R...val?page=3

let me know
Regards

[josefsalem]

Ok friend You nedd the Tools like here (SPI Programmer + Pomona Soic Clip) :

https://www.bios-mods.com/forum/Thread-R...val?page=3

let me know
Regards

thank you my friend but its too hard to do

[Da Vinci Code]

Hello, Josefsalem!
We solved same problem.
Follow next instruction.
1. Download latest version of your BIOS
2. Flash new BIOS
3. Take USB stick and format to FAT32
4. Create directory structure EFI\Boot
5. Download BOOTX64.EFI (link is http://www.mediafire.com/download.php?81vegw2aw0pxcib)
6. Put downloaded file to Boot directory.
7. Restart and enter BIOS setup.
8. Make sure you have following values:
Legacy Support: Disable
Secure Boot: Disable
9. Reboot and press F9 to boot from USB stick
10. Give next commands:
setup_var 0x22c 0x0, then
setup_var 0x39 0x01
11. Reboot and you Windows should find Intel AHCI controller.
12. REPORT RESULT HERE
13. Enjoy.
Must be worked.

[josefsalem]

Hello, Josefsalem!
We solved same problem.
Follow next instruction.
1. Download latest version of your BIOS
2. Flash new BIOS
3. Take USB stick and format to FAT32
4. Create directory structure EFI\Boot
5. Download BOOTX64.EFI (link is http://www.mediafire.com/download.php?81vegw2aw0pxcib)
6. Put downloaded file to Boot directory.
7. Restart and enter BIOS setup.
8. Make sure you have following values:
Legacy Support: Disable
Secure Boot: Disable
9. Reboot and press F9 to boot from USB stick
10. Give next commands:
setup_var 0x22c 0x0, then
setup_var 0x39 0x01
11. Reboot and you Windows should find Intel AHCI controller.
12. REPORT RESULT HERE
13. Enjoy.
Must be worked.

thanks my friend but when i turn Legacy Support: Disable
Secure Boot: Disable when its boots from usb only a black screen appear . what i should do ? and when i try to run my win8.1 i cant only if i return these values Legacy Support: enable
Secure Boot: Disable

[Da Vinci Code]

Try this one-secure boot disabled, legacy support enabled

[josefsalem]

Try this one-secure boot disabled, legacy support enabled

its works booting but here what i get !!

all i want is to install osx as a main os on my laptop thats my point of doing all this so what i want is changing to AHCI