Login

tcsenter · 11-09-2023, 08:46 PM

(11-09-2023, 03:25 PM)Maxinator500 Wrote: This time the table is mapped. I'm going to upload the last time. If doesn't work, I'll give up trying.

Hi did you upload it to same link? I downloaded it an hour ago and checksum, date and time are identical to the previous file.

Maxinator500 · (This post was last modified: 11-10-2023, 02:50 AM by Maxinator500.)

(11-09-2023, 08:46 PM)tcsenter Wrote: did you upload it to same link? I downloaded it an hour ago

I haven't uploaded the 4th archive yet when posted the previous message.

But uploaded it now.

(11-06-2023, 03:18 AM)Maxinator500 Wrote: 5cjt77.zip

Did the same thing as in the 1st mod with complete SLIC table as ACPI5.
And renamed SLIC signature to SLAC in BIOSCOD1 module. Because of this the second SLIC should not load.

There is a webtool with simillar to ToolKit_V3.2's functionality: sliccerttest. It showed me that ACPI5 is valid.

tcsenter · 11-10-2023, 04:41 AM

(11-10-2023, 02:47 AM)Maxinator500 Wrote: I haven't uploaded the 4th archive yet when posted the previous message.

HA! Well that explains it, sorry I thought you had at the time you posted.

Quote:Maxinator500

Did the same thing as in the 1st mod with complete SLIC table as ACPI5.
And renamed SLIC signature to SLAC in BIOSCOD1 module. Because of this the second SLIC should not load.

There is a webtool with simillar to ToolKit_V3.2's functionality: sliccerttest. It showed me that ACPI5 is valid.

Thanks! Will try it later this morning.

tcsenter · (This post was last modified: 11-10-2023, 12:41 PM by tcsenter.)

Flash twice but still .BIN error. If curious:

.zip

AcpiTbls.zip (Size: 71.99 KB / Downloads: 4)

I was wondering, these older M58p systems or system boards are selling quite cheaply used market like the Fleabay. If I were to acquire working one that came with SLIC 2.1 from the factory, would dumping that BIOS be of any assistance, or could it be flashed onto another system board? Or might there be some technical challenges to flashing with the BIOS USF/BIN/ROM dumped from another (identical) board? Thanks again for help!

Maxinator500 · 11-10-2023, 01:07 PM

The problem is that LENOVOTC-5C_V2.1-Error.bin
missing two last bytes.
As mentioned, that was my last attempt. Sorry.

(11-10-2023, 12:40 PM)tcsenter Wrote: Or might there be some technical challenges to flashing with the BIOS USF/BIN/ROM dumped from another (identical) board?

I don't know.

tcsenter · 11-10-2023, 01:24 PM

No problem thank you for trying!

Login
Username:
Password:	Lost Password?
	Remember me