Microcode update request for Foxconn FlamingBlade GTI and CPUID 206C2

[ratava]

Sorry to resurrect the thread but..

I updated my x58m with the latest microcode, the processor works but the uncore multiplier is locked, grayed out.

Is there any fix?

[jpk1337]

Hello

So according to this thread, i managed to fix the uncore bug regarding the Xeon X5650. But i still have a problem: Regardless of the other settings, if i try to set the baseclock to 180 or above, the system won't even post. the board loops a few debug codes on the internal display and then goes into overclock recovery.
Does anyone know why that is? Clock 179 runs like a charme.

Thank you in advance for your help
(And excuse possible mistakes.. i'm german)

[mac@bm]

hi genius239,

Now that HP has released a patched BIOS for their X58 mobos as detailed here,
http://www.overclock.net/forum/5-intel-c...ftown.html

Is it possible to incorporate both the above updated cpuid 06c2 microcode and the new HP patched microcode into the Foxconn P10 BIOS?

I actually have the Flaming Blade model (non GTI) but I had earlier successfully flashed GTI bios2.rar onto my set. If you can patch the actual Flaming Blade model (non GTI) P10 BIOS, that would be an even bigger bonus. Pls see file attachment for the original non GTI P10BIOS.

Thanks in advance.

[genius239]

hi genius239,

Now that HP has released a patched BIOS for their X58 mobos as detailed here,
http://www.overclock.net/forum/5-intel-c...ftown.html

Is it possible to incorporate both the above updated cpuid 06c2 microcode and the new HP patched microcode into the Foxconn P10 BIOS?

I actually have the Flaming Blade model (non GTI) but I had earlier successfully flashed GTI bios2.rar onto my set. If you can patch the actual Flaming Blade model (non GTI) P10 BIOS, that would be an even bigger bonus. Pls see file attachment for the original non GTI P10BIOS.

Thanks in advance.

Try this.
http://www.mediafire.com/file/9jadgqk8mx..._ucode.rar

[mac@bm]

Thank you very much for the prompt reply and modded BIOS. Will make time to try it out soon and feedback here.

Cheers.

[mac@bm]

@genius239

Update

Uncore multiplier changes - OK (yay!)

Let me go update and patch Windows next... thanks.

[mac@bm]

Total success after patching Windows 10 to date according to Inspectre.... genius239, you live up to your nick!

[mac@bm]

Think I have just found your LGA 771 BIOS page today - wow, a very nice repository!

http://genius239239.myweb.hinet.net/771/