Please mod Bios 2.0 to SLIC 2.1 for Windows 7

[golden]

-Motherboard Manufacturer and Model : BenQ Joybook S42-Lm 31
-Bios Revision : 1.20(2.0.0.11)
-Bios Type : Phoenix
-Bios SLIC : 2.1 (BENQ)
-Bios Link : http://www.benq.co.th/products/joybook/?product=1373&page=downloads&dType=B

Thank you very much

[1234s282]

Wow , this is an extra awkward bios , im reading through some in depth instructions now to grab the bios file out of the exe and out of the .CAB file!

But if i can manage this then we have made another major step forward in BIOS modding :-D

Thanks for your patience

Admin

[1234s282]

Did It!

Here you go , i used BenQ 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/BenQ%20Jo...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[golden]

i open program PHLASH16 but file open failed G:bios.wph
how to flash
i use os windows 7
Thank you

[1234s282]

No , you have to create a bootable DOS CD/DVD/USB , copy all the modded files over and then execute phlash16 from the DOS prompt (You have to boot off the dos disk)

We have a guide here http://www.bios-mods.com/forum/Thread-Ho...-DOS-Guide

Regards
Admin