RAID on Asus IPIBL-LB

[FrankTheRocks]

Hi,

I've added a SSD to my computer but the ICH9R hard drive controller has problem detecting it. I've read on the Net that a later version of ICH9R rom could solve my problem. Is it possible to update it for this bios?

Computer : HP m9340f
MotherBoard manufacturer : Pegatron
MotherBoard model: IPIBL-LB (Benicia)
Bios version: 5.43
ICH9R rom version : 7.6.6.1002

BIOS link: http://h10025.www1.hp.com/ewfrf/wc/softw...6&sw_lang=
Motherboard caracteristics page: http://h10025.www1.hp.com/ewfrf/wc/docum...=c01611312
Computer support page: http://h10025.www1.hp.com/ewfrf/wc/produ...ct=3740326

Thanks for your help !

[1234s282]

I cant get this bios open in any of my tools!!! Sorry

Admin

[The Veterant]

I cant get this bios open in any of my tools!!! Sorry

Admin

Yes, I need the same support for mr HP Pavilion same bios ver. as the member before willing to donate if I get any support for this Bios. I have 2 vertex2 120gb SSD setup in a Raid0 array and when I boot the Bios don't see my araid on the bootorder sequence, then I have to reboot hit F10 enter the bios switch setting of Raid to ACHI back and forward, then leave it on Raid exit bios then see my araid on the bootorder sequence order and if after that I have to reeboot not problem, the stars again when I shutdown the computer and do a cold boot, then I have to repeat the process that I explain at first.

[Dansolo]

Could you try to post the ROM file itself? For those of you with this computer, if you run that setup, it should extract some files to a temporary directory. Grab the file before closing the program. I'm not sure what I'll be able to do with it, but I'll give it a shot if you do that.

[IvanFromSPb]

Hello everyone.
I read a topic here dedicated to a problem with a creation RAID-5 on the ASUS IPIBL-LB motherboard - only RAID-0 and 1. In my case I can't even find an option in SATA Controller mode with RAID; IDE and AHCI only. My BIOS revision now is 5.43, Core version 8.0.14. Something (HP settings I suppose) prevents me to set the option with RAID.
Do anyone know how can I come over such kind of ijustice? Maybe trying another BIOS?
Thanks.

[erapsag86]

Hi guys!

It is possible to have the same mod for Benicia ipibl-lb BIOS but with Intel Matrix Storage version 10.x.x?

many thanks and sorry for bad english

[erapsag86]

Problem solved!

I made a modified Bios from Antinomy's raid5 5.43 rom, in which inserted Intel's RST 11.2 with TRIM support (the best version you can desire for ICH9R)

Enjoy!

[degsy41]

Problem solved!

I made a modified Bios from Antinomy's raid5 5.43 rom, in which inserted Intel's RST 11.2 with TRIM support (the best version you can desire for ICH9R)

Enjoy!

Did this BIOS mod work? Could you use it for RAID5?
How do I install it?

thanks

Degsy

[erapsag86]

Problem solved!

I made a modified Bios from Antinomy's raid5 5.43 rom, in which inserted Intel's RST 11.2 with TRIM support (the best version you can desire for ICH9R)

Enjoy!

Did this BIOS mod work? Could you use it for RAID5?
How do I install it?

thanks

Degsy

Hi, i actually use this bios for 2 months. it is rock solid.

this is THE BEST BIOS you can desire for IPIBL-LB. and you can install it with afudos utility, as a standard factory bios.
100% ok. guaranteed.

[djorkaef]

Problem solved!

I made a modified Bios from Antinomy's raid5 5.43 rom, in which inserted Intel's RST 11.2 with TRIM support (the best version you can desire for ICH9R)

Enjoy!

I followed your instructions and got the BIOS flashed with your file, when going to SETUP I can see it is another version now, but when opening the storage part using Control-I, I can still only select RAID0 or RAID1. It is looking the same as it looked before. Should I first have a 3rd disk inside it in order to view that option?

EDIT: YES it has RAID5 available after plugging in the 3rd disk, I assume it didn't have that before, thanks!