Posts: 2
Threads: 1
Joined: Jul 2019
Reputation:
0
Hello i have dell 5559 with i5 6200u cpu, bios latest 1.7.0 that is an .exe file which unzipped using universal bios extractor to get rom file, i have recently updated my ram to hyperx 2x8b 2133 mhz with 1.35v requirement but my bios still shows it as 1600mhz default and even cpuz shows 798.1 which when doubled as its dual channel it is still 1600mhz and i wanted to update my ram speed and also unlock dvmt preallocate values, at this point i used uefitool and extracted contents of the rom and found setup and extracted it using ifr extractor and was able to locate values for changing the memory speed and voltage ( i am not sure again what my bios is either ami or phoenix as using both methods i read somewhere i was able to locatre setup and dxecore but not able to locate a specific fe****fe.rom that i should find in dxecore so i am assuming i have ami bios), anyways i created the bios and was able to boot to grub and used commands and it stays at the last line saying setting the values and reboots but the values have not changed, what am i doing wrong and is my bios locked and wont allow me to change, any ideas appreciated.