[REQUEST] Lenovo Flex 2-15 (A0CNxxWW) Whitelist Removal

[BDMaster]

Use this tool run It as Admin and upload the result file here :

http://rghost.net/7xBfRPCvp

http://rghost.net/53128665

let me know
Regards

[BDMaster]

I relied in PM !
Regards

[pvtjamesryan2]

Request: Whitelist removal

Laptop: Lenovo Flex 2 15

Current WLAN card: Realtek RTL8723BE Wireless LAN 802.11n PCI-E NIC

New WLAN card: intel 7265ngw

Result.rar: https://www.sendspace.com/file/nr22zc

BIOS: A0CN31WW

BIOS Download link: http://support.lenovo.com/us/en/products...s/DS101193

PCI ID of the Wifi/WWAN card that originally came with the laptop: Device PCI\VEN_10EC&DEV_B723&SUBSYS_B73617AA&REV_00\4&26a9392d&0&00E2


RSA Signed? I don't know. How do I check?



Thank you for the help!

[BDMaster]

Here You go :

http://rghost.net/6grZFXkFt

let me know
Regards

Donate to me for my work and time . . . look into my Signature

[BDMaster]

Here You go :

http://rghost.net/8mb9fD7zm

Let me know
Regards

Doante to me . . . look into my Signature

[pvtjamesryan2]

Here You go :

http://rghost.net/8mb9fD7zm

Let me know
Regards

Doante to me . . . look into my Signature

Thanks you very much my good sir.

It worked. Only issue I had was it took me nearly 2 hours to figure out that I had to set the BIOS from UEFI to Legacy to boot into DOS from the flash drive. It was a bit of a headache, but I got it.


A little off topic. Removing the old card, the antenna connector broke off into the black antenna cable. I am using the white cable as the MAIN, but the AUX is unplugged. Do I really need to replace the cable and have the AUX hooked up?

I had trouble finding a desecent answer online.

Also, I'm sending you a donation for your help. Thanks for all the help. I do appreciate it.

I'm really glad you do this otherwise I'd have to use a USB adapter forever. The internal card that comes with these computers is that bad.

[moetop]

Can I get a Updated whitelist please ? I am puting an Intel 7265ngw in my Flex 2 15. Upload here. http://rghost.net/8zLcXMYg7

[BDMaster]

Here You go :

http://rghost.net/8fCNrK8Xk

Let me know
Regards

Doanet to me . . . look into my Signature

[moetop]

This makes no sense. I cant get a Dos / freedos USB disk to boot for the life of me.. ran both the HP and Rufus tools as admin, created dos and free dos disks, I can see the proper .SYS files on the drive, and it will not boot. I tried both selecting the boot device, and setting boot priority in the Bios. I also tried the usb 2.0 and 3.0 ports. I tried all combos nothing works.

Any Ideas?

Here You go :

http://rghost.net/8fCNrK8Xk

Let me know
Regards

Doanet to me . . . look into my Signature

[BDMaster]

Have You Disabled Secure Boot and Set Legacy Bios USB into Menu steup utiltity Bios ?
have You used a max 4 GB USB or Greater ?
Regards