| 
						
						Welcome
					 | 
				 
			
			
		
				
					
						
				You have to register before you can post on our site. 
				 
				
					 | 
				 
			
		  
		
		
		
		 
		
				
		 
			 | 
		
		
		
	
		
			| 
				
				 
					[REQUEST] Lenovo G710 BIOS Whitelist Removal
				 
			 | 
		 
	
		
 
        
		
	Posts: 10,253 
	Threads: 3 
	Joined: Oct 2011
	
 Reputation: 
 540
	 
        
 
	
	
		 (11-06-2014, 07:32 AM)jvdp Wrote:   (11-06-2014, 07:04 AM)BDMaster Wrote:   (11-06-2014, 05:45 AM)jvdp Wrote:  Hey BDMaster, 
 
the bin file should be alright and correct now, desoldered it from my motherboard, will upload the other later on. 
Maybe you can have a check on this bios new bios 
 
Regards, 
 
Johnny  
Ok friend, 
your is now ok as structure but You read only half size ! 
Normal Bios File is starting from 0x00000000h Offset to 0x00400000h address and it end with this bytes 785634120000F0FF !!! 
Your end to 0x00228000h offset and is filled of 0x00h bytes until 0x00400000h address !!! ,so I think something is set wrong on your SPIPGM. 
I compared your with another I got (is a Bios Backp) and there are these differences, not normal as your is missing of a good chunk containing DMI informations (UUID, Serial, Model, Windows Key, Etc.). 
You can do by yourself as You get your Bios Backup 8ECN94WW done by FPT tool, It's the complete Region_Bios Dump !!! 
I can use this one to make a Mod and reflash by SPIPGM, but if We cannot get right version reading We can never write again back Modded !!! 
Look again your SPIPGM setting choice the right Eeprom Chip and retry. 
Let me know 
Regards  
Hi BDMaster, 
 
Thanks for the information, I will check later on and see if i can get a good one for you. Also get the other rom (W25Q16DV). 
 
I detect the chip id and then select the W25Q32FV as that is what it is saying on the chip itself so that should be the correct id of the chip. 
  
Let me get a good one, no use to waste time on a incorrect bios backup, will let you know when i got the backups. 
 
Thanks for your help. 
 
Regards, 
 
Johnny 
Ok friend,  
it's not problem for time or for modding I am doing best for You as  
if You SPI Programmer It's not working well You cannot rewrite the Bios Mod and your laptop will fault and You would to buy another Chip preprogrammed to soldering on MoBo. 
Please let me get te 2nd Dump file ! 
I will prepare your Bios Mod based on FPT Backup (I got It too). 
Regards
	  
	
	
 
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !   
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
 
	
		
	 
 
 
 
 
        
		
	Posts: 10,253 
	Threads: 3 
	Joined: Oct 2011
	
 Reputation: 
 540
	 
        
 
	
	
		 (11-06-2014, 10:43 AM)Tomo336 Wrote:  Bump. 
 
Help please? 
Hi friend,  
here You go : 
 https://www.sendspace.com/file/nng4as
let me know 
Regards
	  
	
	
 
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !   
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
 
	
		
	 
 
 
 
 
        
		
	Posts: 13 
	Threads: 0 
	Joined: May 2014
	
 Reputation: 
 0
	 
        
 
	
		
		
		11-17-2014, 05:10 AM 
(This post was last modified: 11-19-2014, 12:41 PM by jvdp.)
		
	 
	
		 (11-06-2014, 06:01 PM)BDMaster Wrote:   (11-06-2014, 07:32 AM)jvdp Wrote:   (11-06-2014, 07:04 AM)BDMaster Wrote:   (11-06-2014, 05:45 AM)jvdp Wrote:  Hey BDMaster, 
 
the bin file should be alright and correct now, desoldered it from my motherboard, will upload the other later on. 
Maybe you can have a check on this bios new bios 
 
Regards, 
 
Johnny  
Ok friend, 
your is now ok as structure but You read only half size ! 
Normal Bios File is starting from 0x00000000h Offset to 0x00400000h address and it end with this bytes 785634120000F0FF !!! 
Your end to 0x00228000h offset and is filled of 0x00h bytes until 0x00400000h address !!! ,so I think something is set wrong on your SPIPGM. 
I compared your with another I got (is a Bios Backp) and there are these differences, not normal as your is missing of a good chunk containing DMI informations (UUID, Serial, Model, Windows Key, Etc.). 
You can do by yourself as You get your Bios Backup 8ECN94WW done by FPT tool, It's the complete Region_Bios Dump !!! 
I can use this one to make a Mod and reflash by SPIPGM, but if We cannot get right version reading We can never write again back Modded !!! 
Look again your SPIPGM setting choice the right Eeprom Chip and retry. 
Let me know 
Regards  
Hi BDMaster, 
 
Thanks for the information, I will check later on and see if i can get a good one for you. Also get the other rom (W25Q16DV). 
 
I detect the chip id and then select the W25Q32FV as that is what it is saying on the chip itself so that should be the correct id of the chip. 
  
Let me get a good one, no use to waste time on a incorrect bios backup, will let you know when i got the backups. 
 
Thanks for your help. 
 
Regards, 
 
Johnny  
 
Ok friend,  
it's not problem for time or for modding I am doing best for You as  
if You SPI Programmer It's not working well You cannot rewrite the Bios Mod and your laptop will fault and You would to buy another Chip preprogrammed to soldering on MoBo. 
Please let me get te 2nd Dump file ! 
I will prepare your Bios Mod based on FPT Backup (I got It too). 
Regards 
Hi BDMaster,
 
So I read the chips with an adapter now, can you have a look if this is ok?
 W25Q32FV
W25Q16DV
Let me know if you need something else, the w25q32 should be correct now.
 
Regards.
 
John
	  
	
	
	
		
	 
 
 
 
 
        
		
	Posts: 13 
	Threads: 0 
	Joined: May 2014
	
 Reputation: 
 0
	 
        
 
	
	
		Hey BDM, 
 
Do you have an easy to follow guide maybe, i dont mind to try it myself, just need to know what im looking for and how to edit/with what to edit it. Maybe tools that i need to use and so forth, greatly appreciate your help so far. 
 
Regards, 
 
Johnny
	 
	
	
	
		
	 
 
 
 
 
        
		
	Posts: 13 
	Threads: 0 
	Joined: May 2014
	
 Reputation: 
 0
	 
        
 
	
	
		Sorry going to bump this for a second. 
 
Hi BDMaster, 
 
If you got the time, can you tell me what to look for or otherwise can you have a look in the files and tell me what i'm looking for? 
 
Thank you very much. 
 
J
	 
	
	
	
		
	 
 
 
 
 
        
		
	Posts: 10,253 
	Threads: 3 
	Joined: Oct 2011
	
 Reputation: 
 540
	 
        
 
	
		
		
		11-26-2014, 02:57 PM 
(This post was last modified: 11-26-2014, 03:17 PM by BDMaster.)
		
	 
	
		 (11-25-2014, 06:14 PM)jvdp Wrote:  Sorry going to bump this for a second. 
 
Hi BDMaster, 
 
If you got the time, can you tell me what to look for or otherwise can you have a look in the files and tell me what i'm looking for? 
 
Thank you very much. 
 
J 
I forgot You my friend, 
now I will do your Bios Mod ! 
Your Bios is second file W25Q32BV.BIN, but UEFITool say It's bad !!! 
You can try to open by this Tool (CodeRush Prg) : 
 http://forums.mydigitallife.info/threads...and-editor
https://github.com/LongSoft/UEFITool/rel....4_win.zip
So I will try to modfy this one but I think You will have problems !
 
Ok friend,  
I foud an your Bios Backup done by FPT about LENOVO-8ECN94WW.rom and It's good so I used this one for  
Bios Mod then You have to write It into W25Q32BV 4096 KB Bios Region and that's It !!! 
 http://rghost.net/59284222
Let me know 
Regards
	  
	
	
 
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !   
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
 
	
		
	 
 
 
 
 
        
		
	Posts: 13 
	Threads: 0 
	Joined: May 2014
	
 Reputation: 
 0
	 
        
 
	
	
		 (11-26-2014, 02:57 PM)BDMaster Wrote:   (11-25-2014, 06:14 PM)jvdp Wrote:  Sorry going to bump this for a second. 
 
Hi BDMaster, 
 
If you got the time, can you tell me what to look for or otherwise can you have a look in the files and tell me what i'm looking for? 
 
Thank you very much. 
 
J  
I forgot You my friend, 
now I will do your Bios Mod ! 
Your Bios is second file W25Q32BV.BIN, but UEFITool say It's bad !!! 
You can try to open by this Tool (CodeRush Prg) :  
 
http://forums.mydigitallife.info/threads...and-editor 
 
https://github.com/LongSoft/UEFITool/rel....4_win.zip 
 
So I will try to modfy this one but I think You will have problems ! 
 
Ok friend,  
I foud an your Bios Backup done by FPT about LENOVO-8ECN94WW.rom and It's good so I used this one for  
Bios Mod then You have to write It into W25Q32BV 4096 KB Bios Region and that's It !!!  
 
http://rghost.net/59284222 
 
Let me know 
Regards 
Hey BDMaster,
 
Okay will try the backup from the FPT tool.
 
But I think you were using an old version bios from me that indeed was corrupt as I did not have the proper tool to read from it.
 
The version that is correctly taken from the bios is  W25Q32FV_G (checked this also with the UEFI tool, no error messages for me) and the other one is the  W25Q16DV_G (other bios chip on the board), maybe you want to have a look as asked before.
 
Thanks a lot for your help, will let you know how things go!
 
Regards,
 
J
	  
	
	
	
		
	 
 
 
 
 
        
		
	Posts: 10,253 
	Threads: 3 
	Joined: Oct 2011
	
 Reputation: 
 540
	 
        
 
	
		
		
		11-26-2014, 04:20 PM 
(This post was last modified: 11-26-2014, 04:22 PM by BDMaster.)
		
	 
	
		Ok friend,  
I checked now your files are good !!!, but I checked too the new Bios File  
W25Q32FV_G.BIN and Bios Backup I got LENOVO-8ECN94WW.rom (Hex Compare) : 
 http://rghost.net/59285152
and They are the same so Bios Mod I sent is good     !!! 
I think this time You will do the right write into this Eeprom !!! 
Let me know 
Regards
 
Good Job my friend !
	  
	
	
 
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !   
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
 
	
		
	 
 
 
 
 
        
		
	Posts: 4 
	Threads: 0 
	Joined: Jan 2015
	
 Reputation: 
 0
	 
        
 
	
		
		
		01-10-2015, 11:05 AM 
(This post was last modified: 01-10-2015, 11:48 AM by Bypass.)
		
	 
	
		I just buy Intel 7260HMW BN and I cant figure out how to remove whitelist. I will be very grateful for your help. 
MODEL: LENOVO G710 59-413967 
CPU: Intel® Pentium® Processor 3550M 
RAM [MB]: 4096 
HDD [GB]: 1000 
GPU: NVIDIA® GeForce™ 820M 
WiFi CARD: Braodcom BCM943142HM 
BIOS Type :Insyde H20 
BIOS SLIC : N/A - laptop purchased without a system 
BIOS Revision: 8ECN95WW
 
Here is BIOS dump but I do not know if I did it well.
 https://www.sendspace.com/file/xs5c93
Thanks in advance for any help
	  
	
	
	
		
	 
 
 
 
 
        
		
	Posts: 10,253 
	Threads: 3 
	Joined: Oct 2011
	
 Reputation: 
 540
	 
        
 
	
	
		 (01-10-2015, 11:05 AM)Bypass Wrote:  I just buy Intel 7260HMW BN and I cant figure out how to remove whitelist. I will be very grateful for your help. 
 
MODEL: LENOVO G710 59-413967 
CPU: Intel® Pentium® Processor 3550M 
RAM [MB]: 4096 
HDD [GB]: 1000 
GPU: NVIDIA® GeForce™ 820M 
WiFi CARD: Braodcom BCM943142HM 
BIOS Type :Insyde H20 
BIOS SLIC : N/A - laptop purchased without a system 
BIOS Revision: 8ECN95WW 
 
 
Here is BIOS dump but I do not know if I did it well. 
 
https://www.sendspace.com/file/xs5c93 
 
Thanks in advance for any help 
Here You go :
 http://rghost.net/60267670
let me know 
regards
 
Donate to me fr my work and time . . . look into my Signature   
	 
	
	
 
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !   
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
 
	
		
	 
 
 
 
	 
 |  
		
			
		 
	 
	
		
	 
	
		
	 
	 
	
	
	
	 
	
	
		
		
	 
	 
	
 
Users browsing this thread: 16 Guest(s)
 
	
		 |