10-06-2016, 04:37 AM (This post was last modified: 10-06-2016, 04:41 AM by dazzler22.)
Hi There,
I have a Z500 touch running v1.21 of the bios, i would like the bios unlocked and the wifi whitelist removed.
is there a version of this bios already done that i can download and install? or does it have to be indevidual?
Im running windows 10 so not to worried about the win8.1 key in the bios (can take a backup first anyway) as windows 10 keys are a hash of the pc and thus this should not change with bios mod.
I have a Z500 touch running v1.21 of the bios, i would like the bios unlocked and the wifi whitelist removed.
is there a version of this bios already done that i can download and install? or does it have to be indevidual?
Im running windows 10 so not to worried about the win8.1 key in the bios (can take a backup first anyway) as windows 10 keys are a hash of the pc and thus this should not change with bios mod.
10-22-2016, 07:30 PM (This post was last modified: 10-22-2016, 07:55 PM by MRB206.)
I'm posting beginning to end instructions I utilized for my Lenovo P500 series 6 chipset. I ran into lots of issues prior to a successful flash, so thought I'd post what worked for me. The process I'm posting is what I pieced together from reading several different posts by ratdude747 and donovan600.
B. Put Flash related files on the USB stick:,
1) Download prr2.zipand FPT_DOS.zip - located here
2) Unzip and copy 3 files to usb: prr2.exe, fpt.exe and fparts.txt
Scroll to the bottom and click on Advanced Startup -> Restart Now
Click on Troubleshoot
Click on Advanced Option
Click on UEFI Firmware Settings
Click on Restart
D. In the BIOS Setup Utility "InsydeH20 Setup Utility", make the following changes: 1) Configuration tab BIOS Black Flash [Enabled] 2) BOOT tab: Boot Mode [Legacy Support] Boot Priority [Legacy Support] USB Boot [Enabled] Priority > move USB to the top 3) F10 to save and exit
E. After the reboot, the USB loads, and then run these commands: 1) ppr2 2) fpt.exe -f output_mod.bin -BIOS 3) fpt.exe -VERIFY output_mod.bin -BIOS note: because of the format of my usb I deviated from donovan600's instructions (link above) and I used "fpt" rather than "fptw"
Posts: 2
Threads: 0
Joined: Mar 2018
Reputation:
0