Hello. Tell me if it is possible to make a bios modification to achieve normal operation of a non-original battery and its normal charging? At startup, it gives The battery installed is not supported by this system.
Posts: 1
Threads: 0
Joined: Feb 2023
Reputation:
0
Also anyone knows the proper process to do it? I pulled CS on the other 4mb flash chip to 3.3v, but it still wasn't detected in like 9/10 attempts. Also i had to keep cs pulled to 3.3v all the time otherwise the two dumps had different hash. Also the default SPI speed on flashrom on raspberry pi worked well and dumped it in like 30 seconds so i didn't have to hold the cable there manually for too long.
Posts: 6,412
Threads: 0
Joined: Jun 2016
Reputation:
537
Also anyone knows the proper process to do it? I pulled CS on the other 4mb flash chip to 3.3v, but it still wasn't detected in like 9/10 attempts. Also i had to keep cs pulled to 3.3v all the time otherwise the two dumps had different hash. Also the default SPI speed on flashrom on raspberry pi worked well and dumped it in like 30 seconds so i didn't have to hold the cable there manually for too long.
Hi
Wrong. Need 4Mb chip ONLY
Posts: 1
Threads: 0
Joined: May 2023
Reputation:
0