[REQUEST] Lenovo Y50-70 (9ECNxxWW) BIOS Unlock

[BDMaster]

hai BDMaster ,

Would you mind helping me getting the white list removed and advanced menu unclocked ?? Would appreciate it ,
Please find the dump below :

https://www.sendspace.com/file/69ioti

Thank you very much sir,

Here You go :

http://rghost.net/60092547

let me know
regards

P.S. Donate to me if You can so I will continue . . . look into my signature

help me!!
iam install this bios unlock . but next reset for inter bios : inter system password?!?


i am request system password


please me....

You used a Bios Mod for another user and CLONED his Laptop with Bios PWD too !
Have You an your previous Bios Backup of your laptop to use to roll back ?
Let me know
Regards

[BDMaster]

hi BDMaster
Could you help me unlock my bios to get the advanced menu?
my results http://rghost.net/60168497
my bios backup whit universal bios backup LENOVO-9ECN30WW(V1.13).rom http://rghost.net/60168538

Thank you very much and happy new years for all

Here You go :

http://rghost.net/60169739

Let me know
Regards

Donate to me for my work and time !!!

[kiske]

I have unlocked bios with this tool. Then undervolted CPU and now laptop won't start. Keyboard led comes on, fan starts spinning, but there is no signal from display. I bricked my la laptop?

[BDMaster]

I have unlocked bios with this tool. Then undervolted CPU and now laptop won't start. Keyboard led comes on, fan starts spinning, but there is no signal from display. I bricked my la laptop?

Yes my friend,
and all users are doing the same errors !!!
Many Bioses Manufacturers are emulating CMOS into flash and It's not possible to delete these
Sttings saved into as are not into Volatile Ram = NRAM, only RTC is RAM and Bios stay Bricked !
You can use only this way :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

Let me know
Regards

P.S. if You decide to buy the SPI Programmer I will help to reflash your Eeprom !

[kiske]

how many cost repair?¿

[Seth Vanity]

Can someone help me with a full bios unlock ? Will Donate for sure.

Just tell me what files I need to provide, thanks !

[BDMaster]

Can someone help me with a full bios unlock ? Will Donate for sure.

Just tell me what files I need to provide, thanks !

Hi friend,
use this tool run It as Admin and upload here the result file :

http://rghost.net/58219938

Use this too and do the same :

http://rghost.net/53128665

let me know
Regards

P.S. I will try to do for You.

[Seth Vanity]

Hi, thanks for the reply.

First Tool: https://www.sendspace.com/file/klali1
Second Tool: https://www.sendspace.com/file/l62xe4

This is what I should follow, right ? https://www.bios-mods.com/bios-recovery/...-recovery/

Also, I read that new Laptops have something soldered and it's harder or impossible to flash a bios without de-soldering it. How can I test if my laptop has that ? Does it show a warning if it's possible to brick it ?

Thanks !

[BDMaster]

Ok friend,
all Eeprom Chips are soldered on MoBo so for all cases where Eeproms are Write Protect
then It needs to desolder and program them !
But not Always is so look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

In your case all will go well as You are lucky and your Bios is reflashable, follow instructions to
flash It from USB Dos :

http://rghost.net/60315299

let me know
regards

P.S. Lenovo Recovery doesn't work ! Donate to me for my work and time . . . look into my Signature

[Seth Vanity]

Ok friend,
all Eeprom Chips are soldered on MoBo so for all cases where Eeproms are Write Protect
then It needs to desolder and program them !
But not Always is so look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

In your case all will go well as You are lucky and your Bios is reflashable, follow instructions to
flash It from USB Dos :

http://rghost.net/60315299

let me know
regards

P.S. Lenovo Recovery doesn't work ! Donate to me for my work and time . . . look into my Signature

So I can just flash it using USB and this guide https://www.bios-mods.com/bios-recovery/...-recovery/ right ?


Sorry, I'm new to this just point me to the right guide (link) if the one I provided is not correct.