[REQUEST] Lenovo Y50-70 (9ECNxxWW) BIOS Unlock

[dusandragovic]

Hi Sir!
Could you unlock my BIOS please?
Thanks in advance, Dusan!
Results:https://www.sendspace.com/file/xd7l4t
BIOS Dump:https://www.sendspace.com/file/vkhqoh

[BDMaster]

OK friend,
Many thanks for your report !!!
Regards

[BDMaster]

Here You go :

http://rghost.net/7ShNYWDJx

let me know
Regards

Donate to me for my work and time . . . look into my Signature

[qommonsense]

Could you please unlock my bios for me? Thanks in advance!!

Results:
https://www.sendspace.com/file/nbe82i

Bios Dump:
https://www.sendspace.com/file/gjaszc

[BDMaster]

Here You go :

http://rghost.net/6l5XWnL29

Let me know
Regards

Doante to em for my work and time . . . look into my Signature

[dusandragovic]

Thank you very much.
Will be donating by the end of the week !

[banox]

Hai BD Master,.. Hai everyone , whatsup ,,
been a while since i dropped by here,,

just wanna share this info on how to recover from soft brick Y50 , caused by changing Offset voltage in Unlocked BIOS. This was tested n confirmed by "Jarn06T" from NBR, at least I got this usefull info from him, n this method referred from those guys on AW forums , kudos to all of 'em.

Basically need to remove back cover , 12 screws, disconnect Battery , and CMOS connector. unplug all ram modules.
then do Power Flee by pressing power button 20 secs or so, ( this might not be necessary ).

Then connect AC , power on, it will bootloop cos no ram installed.
- in one of the shutdown in-between bootloop , quickly connect CMOS battery connector back in its place.. let it reboot , n it will shutdown again cos still no ram Installed.,
- after another shutdown ( still in-between bootloop ) quickly connect/insert 1 ram modules to its placed. then after next reboot it shud back to life to enter setup MODE. then u cud load default settings and restart or shutdown to connect battery & another ram modules, if you had 2 slots installed.

shud there is any other method pls do share , or if this was a repost , please do apologize.

hopefully this cud help others experiencing soft brick after changing OFFSET VOLTAGE settings. NOTE : do not change Voltage ( undervolt ) inside BIOS. ony do in WIndows environtment.
:cheers:

rgds,

[qommonsense]

Here You go :

http://rghost.net/6l5XWnL29

Let me know
Regards

Doante to em for my work and time . . . look into my Signature

Thanks for the fast response! I've flashed it and it works great. Thank you very much!!!!

Got error code 28: Protected range bla bla bla, but hit enter to continue and it did it's job!

[batoonik]

Hi,
Please can you help me and unlock bios in my laptop?
Lenovo Y50-70
Here is backup of my actual bios(created Universal BIOS Backup ToolKit 2.0 I hope it's good)
https://www.sendspace.com/file/8kz8kg

[BDMaster]

Here You go :

http://rghost.net/7hvsqTDyw

let me know
Regards

P.S. doate to me . . . look into my Signature