[REQUEST] Lenovo Y50-70 (9ECNxxWW) BIOS Unlock

[BDMaster]

Here You go :

http://rghost.net/7f6DPgSfC

Let me know
Regards

Donate to me . . . look into my Signature

[umairahasan]

Hi friend,
all 37 version are not moddable as Eeprom Chip Write Protect,
so use this tool run It as Admin and upload the result file here :

http://rghost.net/7GBZt7FVt

Let me know
Regards

P.S. if It's moddable I will upload the Bios Mod quicklky, otherwise
You have to Downgrade to a version previous Bios and then do a Backup !

Hi, can you tell me if my bios version 2.01 is moddable. Here is the results from the application from the
tool from your previous link: https://www.sendspace.com/file/34c2q1

[BDMaster]

Hi friend,
there is only a way to flash the Bios Mod v.2.01 = 37 just to Downgrade and then flash the version
37 Mod gettin the EC Code Disalignment !
Or Better is to Downgrade to v.30 or 31 nad then redo result file and use the Bios Mod previous Bios
Versions !
Let me know
Regards

How To Downgrade :

snebob

Run this to downgrade:

http://download.lenovo.com/consumer/mobi...vy2113.exe

Remember to set the option in bios that enables you to flash an older bios, before you run it.



nop

I found another solution - Just in case it was ever needed.

Download the 1.14 version

http://download.lenovo.com/consumer/mobi...cn31ww.exe

Then use 7-zip to extract that .exe file, You will find a platform.ini file into that folder.

Then Look for "BIOSVFEnable=2" and replace it with "BIOSVFEnable=0", run as Administrator InsydeFlash.exe tool and go !

Verified working

Use this tool run It as Admin and upload here the result fle :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

let me know
Regards

[umairahasan]

Hi friend,
there is only a way to flash the Bios Mod v.2.01 = 37 just to Downgrade and then flash the version
37 Mod gettin the EC Code Disalignment !
Or Better is to Downgrade to v.30 or 31 nad then redo result file and use the Bios Mod previous Bios
Versions !
Let me know
Regards

How To Downgrade :

snebob

Run this to downgrade:

http://download.lenovo.com/consumer/mobi...vy2113.exe

Remember to set the option in bios that enables you to flash an older bios, before you run it.



nop

I found another solution - Just in case it was ever needed.

Download the 1.14 version

http://download.lenovo.com/consumer/mobi...cn31ww.exe

Then use 7-zip to extract that .exe file, You will find a platform.ini file into that folder.

Then Look for "BIOSVFEnable=2" and replace it with "BIOSVFEnable=0", run as Administrator InsydeFlash.exe tool and go !

Verified working

Use this tool run It as Admin and upload here the result fle :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

let me know
Regards

I'm just clarifying, but do you want me to downgrade my BIOS to the one from the first link (version 1.13 I think) then upgrade to the modded BIOS (if so can you send me the download link for the modded BIOS). Or do you want me to downgrade then send you the results file?

[BDMaster]

Ok friend,
I will explain a bit !
Into Bios file there are two parts :

Firmware and EC (Embedded Controller)

We can modify the Bios Region (is a Firmware's chunk) using the older Firmware and flashing
new Bios Region (eluding Secure Boot Check) But We will get an Disalignment wit EC Code
as Firmware (many chunks) and EC are Always flashed togheter !
It will cause a bit of issues or may be nothing, but is safe to use Always the same versions !
So Downgrade and redo result is better choice !
Regards
!

[umairahasan]

Ok friend,
I will explain a bit !
Into Bios file there are two parts :

Firmware and EC (Embedded Controller)

We can modify the Bios Region (is a Firmware's chunk) using the older Firmware and flashing
new Bios Region (eluding Secure Boot Check) But We will get an Disalignment wit EC Code
as Firmware (many chunks) and EC are Always flashed togheter !
It will cause a bit of issues or may be nothing, but is safe to use Always the same versions !
So Downgrade and redo result is better choice !
Regards
!

Hi, I downgraded to 1.13 and these are the results https://www.sendspace.com/file/87mwl7

[physics-geek]

No change, and no "advanced" setting visible in bios menu

Still have
error code: 00000000
exception: 0E

Thoughts apprecaited.

Thank you much.

here You go

You have to Downgrade to Version 30 or 31 to permit to flash Bios Mod back !

How To Downgrade :

snebob

Run this to downgrade:

http://download.lenovo.com/consumer/mobi...vy2113.exe

Remember to set the option in bios that enables you to flash an older bios, before you run it.



nop

I found another solution - Just in case it was ever needed.

Download the 1.14 version

http://download.lenovo.com/consumer/mobi...cn31ww.exe

Then use 7-zip to extract that .exe file, You will find a platform.ini file into that folder.

Then Look for "BIOSVFEnable=2" and replace it with "BIOSVFEnable=0", run as Administrator InsydeFlash.exe tool and go !

Verified working


Then Use this tool run It as Admin and upload here the result fle :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

let me know
Regards

Appreciate that. Looks like what that sequence of commands did was to take my BIOS from where it was at v1.16 down to v1.13 then up to 1.14.

Files you request are at www.sendspace.com/file/0ze5b9 and www.sendspace.com/file/m8mux6

Thx

[Oleh]

for physics-geek
http://rghost.ru/7qwd8lTRt
read PM

[physics-geek]

for physics-geek
http://rghost.ru/7qwd8lTRt
read PM

For Oleh -

When requesting that file sendspace asks me for a password which I don't believe I have - did you mean to send one to me so I could download this file?

When I get to download this, you'll have to tell this newbie that "PM" is :-)

Thanks much for assisting

[Oleh]

for physics-geek
http://rghost.ru/7qwd8lTRt
read PM

For Oleh -

When requesting that file sendspace asks me for a password which I don't believe I have - did you mean to send one to me so I could download this file?

When I get to download this, you'll have to tell this newbie that "PM" is :-)

Thanks much for assisting

pass in Private Messages