[REQUEST] Lenovo Y50-70 (9ECNxxWW) Whitelist Removal

[BDMaster]

Hi im new here. I want to ask how i can install ROM file on my Lenovo y50-70. I previously installed moded 1.14 version of bios and have bunch of problems now. So i must now back to original bios. Please hep me !!!

This is my bios rom. file:   https://www.sendspace.com/file/4gxryb

Here You go :


http://rghost.net/7jkwjrlJS

Let me know
Regards

Donate to me . . . look into my Signature

[kuzayca]

hi

first, sorry for my bad english.
you can remove whitelist for my new intel 7260.


a small donation of course there are.

thanks





http://www.sendspace.com/filegroup/0hMVB...k5Ssvm9HQA

[snebob]

Hello, would you be able to help me out with the whitelist of wlan cards please

https://www.sendspace.com/file/5lbrl6

[BDMaster]

Hi snebob,
I don't know which bios is that as It seems to be original one extracted (not encapsulated)
So or It is a Full Dum Firmware get from Eeprom (I can check looking into) or is
priginal one !
Use this tool run It as Admin and upload the result file :

http://rghost.net/58219938

use this tool too and do the same :

http://rghost.net/53128665

let me know
Regards

[BDMaster]

Here You go :

http://rghost.net/8qXBtlp7V

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

[snebob]

Hi snebob,
I don't know which bios is that as It seems to be original one extracted (not encapsulated)
So or It is a Full Dum Firmware get from Eeprom (I can check looking into) or is
priginal one !
Use this tool run It as Admin and upload the result file :

http://rghost.net/58219938

use this tool too and do the same :

http://rghost.net/53128665

let me know
Regards

 
Hi, i got this from the first program https://www.sendspace.com/file/wjah0h and https://www.sendspace.com/file/aush5g from the second one.

[kuzayca]

a problem
I get this note:

pdr region does not exist.
gbr region does not exist.
error 28: protected range registers are by bios, Preventing flash

then

error 280 failed to disable write protection for the bios space



I have it
I have to 9ecn30ww (1.13v) downgraded
then modified bios
worked, but in bios is the EC VERSION 9eec30ww (1.13v) why and how I can just change it

[BDMaster]

Ok Let me know all procedure You have done, step by step and
I will try to undertand what's happen !
How You downgraded to v.1.13 and which Bios Mod You flashe after ?
I think You used Recovery Mode and then flashed Bios Mod v.2.01 !
Let me know
Regards

[BDMaster]

Here You go :

http://rghost.net/6rVZ8F9Bk

Let me know
Regards

Donate to me . . . look into my Signature

[snebob]

Here You go :

http://rghost.net/6rVZ8F9Bk

Let me know
Regards

Donate to me . . . look into my Signature

I am afraid i have hit the wall and dont know what to do.
I am unable to get to a point where i can flash the modded bios.
In earlier post i read that disabling secure boot in bios was needed but i do not have that option in bios
and i am unable to make a free-dos boot that works with either rufus or win32diskimager .
Flashing with the tool you provided in windows 7 64 bit was not possible.
Thank you for taking the time helping a noob