[REQUEST] Lenovo Yoga 2 Pro (76CNxxWW) Whitelist Removal

[Simonettore]

Hi mate,
on your actual version 1.15 You can flash the Bios Mod using the Sleep Bug

Here You go :

http://rghost.net/82fBNYfZt

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know

Hi BDMaster, do you remember me?

I finally got the needful items:
CH341A 24 25 series EEPROM Flash BIOS USB Programmer output new

New SOIC8 SOP8 flash chip IC Test Clips socket adpter BIOS/24/25/93 programmer

So, how to proceed now?

[Da Vinci Code]

Hello!
BDMaster is absent for more than four months now so he cannot help you, i think.
If you need get mod for rewrite protected bios chips now you must get/buy SPI programmer+Pomona SOIC8 clip.
You should read dumps from chips by programmer and upload it here.
After that i can modify it.
Regards!

[Simonettore]

Hello!
BDMaster is absent for more than four months now so he cannot help you, i think.
If you need get mod for rewrite protected bios chips now you must get/buy SPI programmer+Pomona SOIC8 clip.
You should read dumps from chips by programmer and upload it here.
After that i can modify it.
Regards!

Hi mate.
I think I have those item (I got them from eBay).
So, if I want to remove the whitelist from my Lenovo Yoga 2 - 13 - non pro - BIOS (in order to install a unrecognized wifi card) I have to dump the BIOS from Chip and upload it here?

Please confirm and I will start my work immediately!!! 

Thank you

Simone

[Da Vinci Code]

Yes, you need upload bios dumps using programmer!

[Simonettore]

Yes, you need upload bios dumps using programmer!

Hi mate,
I applied the clip and did "Autodetect" (I verified that it was correctly identified) then I did "Read" and at the end of reading I saved it in .bin and .hex files.

What have I to do later, when you will give me the modified BIOS? Just open the .bin file and click "Auto"? Or do I need to "Erase" before?

Thank you very much!!! 

Simone

[Simonettore]

Yes, you need upload bios dumps using programmer!

Da Vinci, sorry but I need to use my computer for work! Are almost three days that I have it disassembled on the table! Can you modify my bios soon please???

Thank you!!!

[explorer007]

http://rgho.st/686fjLj9r

well sorry,my previous link did not work, this one is. Is there someone to help me out please to make sureall wifi cards will work in the future.

[Da Vinci Code]

Run this tool as Admin and upload results\
https://www.sendspace.com/file/x64ra8

[kadettilac89]

Run this tool as Admin and upload results\
https://www.sendspace.com/file/x64ra8

Here you are ... thx

https://www.sendspace.com/file/l0ko8e

[Da Vinci Code]

Error 285: Fail to load driver (PCI access for Windows).
Tool needs to run with an administrator priviledge account.
You didnt run this tool as Admin!