Request to add SLIC 2.1 to ASRock H270M Pro4 BIOS ver 2.00

[Lincoln WG]

Kindly request a modded BIOS embedded with SLIC 2.1 for ASRock H270M Pro4 motherboard.
The latest BIOS ver 2.00 shall be downloaded at http://www.asrock.com/support/BIOSIG.asp?cat=BIOS8
Thank you very much in advance!

[Serg008]

Kindly request a modded BIOS embedded with SLIC 2.1 for ASRock H270M Pro4 motherboard.
The latest BIOS ver 2.00 shall be downloaded at http://www.asrock.com/support/BIOSIG.asp?cat=BIOS8
Thank you very much in advance!

Asrock H270M Pro4_2.00_Dell21_.rar
https://www.sendspace.com/file/yjo3y3

Upgrade to official (non modified) v.2.00 bios, reboot, then flash modified one.
To flash the MOD use AMI APTIO V afuwin or afuwingui - flash MAIN block only! (use /P option).

[Lincoln WG]

Oh very mice!!
Thank you very much, Serg008.
Note and thanks the reminder, too.
Will confirm if it works well later.

[Lincoln WG]

Ah... Serg008, will it be okay if I do flashing by mean of the Instant Flash feature of the BIOS?

[Serg008]

Ah... Serg008, will it be okay if I do flashing by mean of the Instant Flash feature of the BIOS?

official v.2.00 bios must be flashed with InstantFlash,
but modified bios - with AMI Aptio V afuwin or Afuwingui

[Lincoln WG]

Serg008, it works successfully and fine.
Well done! Thanks again!

[Lincoln WG]

Serg008, the modified BIOS has Suspend-to-RAM failure!
I notice the modded BIOS shows system memory as "DDR4-(110)" instead of "DDR4-(2400)" as in orginal BIOS.
Recover to original BIOS and the Suspend-to-RAM works fine again.
Would you please try again, or kindly advise me how to put the SLIC cerficate into this BIOS because when I open the BIOS with AMITool v1.63, it says "Not AMI BIOS".
Thanks!