[Unlocked] HP 430 Notebook Pc Advance Menus (F.19)

[kopter3161]

Hello to everyone. I'm a new user here. 

Note: This is NOT MY WORK..! It is @BDMaster and @sherlocks who modifies this bios.  
Check here --> https://www.bios-mods.com/forum/archive/...19334.html

What I've done is only patching the iscflash.dll to bypass "bootblock downgrade error" for those who currently using F.22 bios and upward because I'm aware that public RSA-signed bios (F.19 and below) cannot be flashed using HP_Tools recovery media if the bios is currently on F.22 and above. I am one of those who had ZERO knowledge about assembly language, so to patch iscflash.dll in order to avoid "bootblock downgrade error" (which is only 4 op-code changed!) taking me countless hour of deep frustration. LOL. 

Ok so here it is --> Modded F.19 (iscflash.dll patched)

Credit : BDMaster
          : sherlocks
          : Donovan6000 (for his tutorial on assembly code)

Cheers..! 

[diabloretriever]

Hi kopter3161!!

I am so exicitng about your post. Previously, i read sherlock's thread but it seems hard and some reported failures.
As it is only my laptop so before i proceed, i would like to ask some question

Is it just run and install? My bios is f39. Do i need downgrade?
Is the modded bios remove the wifi whitelist?? Because i am planning to use egpu via mpcie in the wifi port. Did u use it for egpu too?

Thank youu

**edit**

i can confirm it works like charm!!


first, i tried to install the insydeflash.exe but it prevented to downgrade. then i randomly tried to run FWUpdlcl.exe then ran the insydeflash.exe. the system restarted and the bios showed F.19.

another question, is the whitelist removed? because i will try to use egpu.

thanks a lot buddy !!!!

[kopter3161]

Hi kopter3161!!

I am so exicitng about your post. Previously, i read sherlock's thread but it seems hard and some reported failures.
As it is only my laptop so before i proceed, i would like to ask some question

Is it just run and install? My bios is f39. Do i need downgrade?
Is the modded bios remove the wifi whitelist?? Because i am planning to use egpu via mpcie in the wifi port. Did u use it for egpu too?

Thank youu

**edit**

i can confirm it works like charm!!


first, i tried to install the insydeflash.exe but it prevented to downgrade. then i randomly tried to run FWUpdlcl.exe then ran the insydeflash.exe. the system restarted and the bios showed F.19.

another question, is the whitelist removed? because i will try to use egpu.

thanks a lot buddy !!!!

Glad to know it works for you! 

AFAIK, the bios fie included in that .zip doesn't have the whitelist removed. In fact, I tried to do that but still gotten nowhere.

However, I have successfully replaced the whitelisted wifi-card that appear in the bios file itself with another card and it worked! Might work for eGpu too but I can't guarantee as I have no such device to test.

[diabloretriever]

Hi kopter3161!!

I am so exicitng about your post. Previously, i read sherlock's thread but it seems hard and some reported failures.
As it is only my laptop so before i proceed, i would like to ask some question

Is it just run and install? My bios is f39. Do i need downgrade?
Is the modded bios remove the wifi whitelist?? Because i am planning to use egpu via mpcie in the wifi port. Did u use it for egpu too?

Thank youu

**edit**

i can confirm it works like charm!!


first, i tried to install the insydeflash.exe but it prevented to downgrade. then i randomly tried to run FWUpdlcl.exe then ran the insydeflash.exe. the system restarted and the bios showed F.19.

another question, is the whitelist removed? because i will try to use egpu.

thanks a lot buddy !!!!

Glad to know it works for you! 

AFAIK, the bios fie included in that .zip doesn't have the whitelist removed. In fact, I tried to do that but still gotten nowhere.

However, I have successfully replaced the whitelisted wifi-card that appear in the bios file itself with another card and it worked! Might work for eGpu too but I can't guarantee as I have no such device to test.

Hi again kopter3161. thanks for your setup. i managed to implement egpu on hp 430 system. here my experince. you can try.
 thanks!

[Twoflowers123]

Hello to everyone. I'm a new user here. 

Note: This is NOT MY WORK..! It is @BDMaster and @sherlocks who modifies this bios.  
Check here --> https://www.bios-mods.com/forum/archive/...19334.html

What I've done is only patching the iscflash.dll to bypass "bootblock downgrade error" for those who currently using F.22 bios and upward because I'm aware that public RSA-signed bios (F.19 and below) cannot be flashed using HP_Tools recovery media if the bios is currently on F.22 and above. I am one of those who had ZERO knowledge about assembly language, so to patch iscflash.dll in order to avoid "bootblock downgrade error" (which is only 4 op-code changed!) taking me countless hour of deep frustration. LOL. 

Ok so here it is --> Modded F.19 (iscflash.dll patched)

Credit : BDMaster
          : sherlocks
          : Donovan6000 (for his tutorial on assembly code)

Cheers..! 

 Hi there kopter3161,
                
                                 Just found your post thanks. I have been searching for this for maybe a week or two. I have a CQ57 same bios. Worked perfectly adv. menu, wont know about upgrade wi-fi till I get a new card. Thanks again. Twoflowers
Update
Got a dual band card I can confirm the w/l is still there. I downloaded sp53673_NWL_ByCamiloml Found in his repository link- https://www.bios-mods.com/BIOS/index.php...telists%2F . Card works fine 5ghz. but no adv menu. one thing or the other. but at least it works. Big thanks to Camiloml and everyone who does this great work. Twoflowers

[leolift]

Hello to everyone. I'm a new user here. 

Note: This is NOT MY WORK..! It is @BDMaster and @sherlocks who modifies this bios.  
Check here --> https://www.bios-mods.com/forum/archive/...19334.html

What I've done is only patching the iscflash.dll to bypass "bootblock downgrade error" for those who currently using F.22 bios and upward because I'm aware that public RSA-signed bios (F.19 and below) cannot be flashed using HP_Tools recovery media if the bios is currently on F.22 and above. I am one of those who had ZERO knowledge about assembly language, so to patch iscflash.dll in order to avoid "bootblock downgrade error" (which is only 4 op-code changed!) taking me countless hour of deep frustration. LOL. 

Ok so here it is --> Modded F.19 (iscflash.dll patched)

Credit : BDMaster
          : sherlocks
          : Donovan6000 (for his tutorial on assembly code)

Cheers..! 

 Hi there kopter3161,
                
                                 Just found your post thanks. I have been searching for this for maybe a week or two. I have a CQ57 same bios. Worked perfectly adv. menu, wont know about upgrade wi-fi till I get a new card. Thanks again. Twoflowers
                                  Update
                               Got a dual band card I can confirm the w/l is still there. I downloaded sp53673_NWL_ByCamiloml  Found in his repository link-  https://www.bios-mods.com/BIOS/index.php...telists%2F  . Card works fine 5ghz.  but no adv menu. one thing or the other. but at least it works. Big thanks to Camiloml  and everyone who does this great work. Twoflowers

Hello, I'm a new user...

i have a hp 630 version 3676 ... i wanted to enable advanced settings.

I then tried to flash the sp53673_NWL_ByCamiloml naturalmede file with [censored].fd 03676 (mine) doing a downgrade through insydeflash.exe with the modified iscflash.dll file.

everything seemed to have gone smoothly but at restart the pc no longer turned on.

I tried the recovery with usb through hd recovery inesrendo in the current folders and previus the files of my [censored].fd generated then with the tool of Andy. renaming them to [censored].reg and [censored].dec but it didn't work.
the screen remained black, even though the usbflash flashed but after a while the button flashed.
after so many attempts made with other usb drives, nothing worked.

I then disassembled the motherboard to disable the cmos battery, I connected everything and magic !!!!! turned on ....
now with the file used for the bios update, I still do not have the advanced settings and asked if anyone has a file for this ...
I'm using the hp sp53673 file with 03676.fd (my model) ...

I saw on the forum that bdMaster should have already done it, but the link is no longer active.

can someone help me?