|
Welcome
|
You have to register before you can post on our site.
|
|
|
Upgrade for Packard Bell Argo C
|
Posts: 3
Threads: 2
Joined: Jun 2013
Reputation:
0
06-26-2013, 01:28 PM
(This post was last modified: 01-05-2021, 12:45 PM by DeathBringer.)
hello everybody,
i'am searching for a unlocked bios version for a packard bell easynote argo c, i already managed to upgrade te cpu from a celeron to t5600 core 2 duo and 2 gb , want to go to 4gb ( tried already ) but is not stable with 4gb so i want furgure out what te voltages are on the memory banks and ras to cas ect , but i need the avandced menu to do so. can anyone help me out here
greetings Jarno
Posts: 3
Threads: 2
Joined: Jun 2013
Reputation:
0
i found out that it is actualy a packard bell mz 35 , found this is in the systeeminfo , maybe it helps, if anyone could help me out here also need silc 2.1 . greetings jarno
Posts: 29
Threads: 3
Joined: Apr 2017
Reputation:
0
(06-26-2013, 03:44 PM)drollio Wrote: i found out that it is actualy a packard bell mz 35 , found this is in the systeeminfo , maybe it helps, if anyone could help me out here also need silc 2.1 . greetings jarno
Yeah, I know its an old tread 
I have the same Packard Bell Argo C With bios v0.20 and a Celeron 430. No OS yet, not shure if it runs win x64, so I have not decided.
If someone knows what I can Upgrade to, I apreciate it 
The dinosaur has arrived! 
Posts: 6,642
Threads: 0
Joined: Jul 2015
Reputation:
159
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with current CPU.
Posts: 29
Threads: 3
Joined: Apr 2017
Reputation:
0
Posts: 6,642
Threads: 0
Joined: Jul 2015
Reputation:
159
05-30-2017, 01:49 PM
(This post was last modified: 05-30-2017, 01:55 PM by DeathBringer.)
Your laptop is based on RC410M chipset.
All CPUs for Socket M are supported.
T7200, T7400, T7600(G) are recommended for upgrade.
Official maximum of memory - 2 Gb, unofficial - 3 Gb.
Posts: 29
Threads: 3
Joined: Apr 2017
Reputation:
0
(05-30-2017, 01:49 PM)DeathBringer Wrote: Your laptop is based on RC410M chipset.
All CPUs for Socket M are supported.
T7200, T7400, T7600(G) are recommended for upgrade.
Official maximum of memory - 2 Gb, unofficial - 3 Gb.
Thanks man
Well, the 7600G is a no-og, since it is fairly costly  Maybe a T7600 or the cheap t7400 
Have any idea of config of ram (mhz and so) I should get?
The dinosaur has arrived!
Posts: 6,642
Threads: 0
Joined: Jul 2015
Reputation:
159
05-30-2017, 03:01 PM
(This post was last modified: 05-30-2017, 03:07 PM by DeathBringer.)
(05-30-2017, 01:32 PM)dabb Wrote: Notice that CPU-Z shows 4 memory slots (2 empty and 2 With ram (?)) I think it's a bug of CPU-Z.
(05-30-2017, 02:47 PM)dabb Wrote: Have any idea of config of ram (mhz and so) I should get? DDR2 667 Mhz
One 2GB SODIMM with 16(!) chips and one 1Gb SODIMM with 8 (!) chips.
Or two identical 1Gb SODIMMs.
Posts: 29
Threads: 3
Joined: Apr 2017
Reputation:
0
(05-30-2017, 03:01 PM)DeathBringer Wrote: (05-30-2017, 01:32 PM)dabb Wrote: Notice that CPU-Z shows 4 memory slots (2 empty and 2 With ram (?)) I think it's a bug of CPU-Z.
(05-30-2017, 02:47 PM)dabb Wrote: Have any idea of config of ram (mhz and so) I should get? DDR2 667 Mhz
One 2GB SODIMM with 16(!) chips and one 1Gb SODIMM with 8 (!) chips.
Or two identical 1Gb SODIMMs.
Thank you very, very much 
The dinosaur has arrived!
Posts: 29
Threads: 3
Joined: Apr 2017
Reputation:
0
I guess it is not possible to run Win10 x64 on this Laptop, due to not NX-support?
I`m running win7 x64 pro with T7400 cpu and 3 gb ram as you recommended - Works great
Yeah, I know its an oldie, but after bios-upgrade, a lot of settings disseapeared, but that was maybe useless setting, I dont know 
The dinosaur has arrived!
|
Users browsing this thread: 1 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[MVP] Top Contributor](images/badges/english/team-top-dog.gif "[MVP] Top Contributor")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")