Westmere EP (Xeon 56xx) support for Fujitsu-Siemens D2618-Bx

[PapaDos]

It rather strange
What is the result with native BIOFLASH.EXE & BiosPack for D2618-Cx?
P.S. Can you calibrate your monitor to see first letter?

Native result for orig BIOF and orig. Cx files.

> P.S. Can you calibrate your monitor to see first letter?
Have some trobles here for now. It was "D" letter.

[PapaDos]

If the result will be the same then try other trick.
1. Make flashing disk with BiosPack for D2618-Cx.
2. Copy modded file BIOFLASH.EXE to this disk.
3. Copy A2618_C1.OMF to A2618_B1.OMF
4. Copy C2618_C1.OMF to C2618_B1.OMF
5. Copy D2618_C1.OCF to D2618_B1.OCF
6. Copy M2618_C1.OMF to M2618_B1.OMF
7. Boot and make a photo of result.

Copied moded BIOF and did next in a few steps.

1. Renamed original D2618_C1.OCF to D2618_B1.OCF - see the result in "BIOF-mod_D2618-Subs".
2.Put two packs of files to the disk:
-a)native Cx files with original names;
-b)native Cx files renamed as Bx files;
The result of the 2nd step is in "BIOF-mod_all_CxFilesPlusBxFilesNames_the_same_time".

[DeathBringer]

1. Make flashing disk with BiosPack for D2618-Cx.
2. Copy new version of modded file BIOFLASH.EXE to this disk.
3. Delete all *.OCF & *.OMF files.
4. Boot and make a photo of result.

[PapaDos]

1. Make flashing disk with BiosPack for D2618-Cx.
2. Copy new version of modded file BIOFLASH.EXE to this disk.
3. Delete all *.OCF & *.OMF files.
4. Boot and make a photo of result.

Done. The letter there is "D".

[DeathBringer]

Good.
Now restore A2618_C1.OMF, C2618_C1.OMF, D2618_C1.OCF & M2618_C1.OMF
And boot again.

[PapaDos]

Good.
Now restore A2618_C1.OMF, C2618_C1.OMF, D2618_C1.OCF & M2618_C1.OMF
And boot again.

Done. The result is the same as before.

[DeathBringer]

Show me the result of using native BiosPack for D2618-Bx.

[PapaDos]

Show me the result of using native BiosPack for D2618-Bx.

With BIOFm2 exe file, right?

[DeathBringer]

No, without any mod.

[PapaDos]

No, without any mod.

Here we are.