qosmio x870 InsydeH2O password

[taoufik.om]

my bios is supervisor password protected ; can enyone help me to unlock it please

result file from NEW_BACKUP_FPTs.exe is here : http://www.sendspace.com/file/xaqbzn

-----------------------------------
-Manufacturer: Toshiba
-Model : Qosmio x870-psplze
-Bios Revision : 6.30
-Bios Type : InsydeH2O
-Original Bios Link : http://www.sendspace.com/file/kbclix

[felipejfc]

try this mod

http://dl.felipejfc.com/bios%20mods/no%2...IPEJFC.zip

report

[taoufik.om]

try this mod

http://dl.felipejfc.com/bios%20mods/no%2...IPEJFC.zip

report

thank you very much ; my problem solved by this method :

from the original package ther is 2 .ini files we are going to edit parameters :

- platform.ini
- unvs .ini

i have found :
- password=0 ; changed to password=1
- clearcmos=0 ; changed to clearcmos=1
- checkversion=1 ; changed to checkversion=0 (in order to flash the bios under windows without cheking version an tell me it is not possible bcz version are the same :-) )

saving and launching insydeflash.exe.

---------------------

by the way ; your bios flash files can mod my bios ? and can i change graphic card or proessor ?

[taoufik.om]

but !!!!!!!

Model and serial number changed after fflashing bios from :
FROM : Qosmio x870-psplze TO : satellite P870-PSPLAC

SERIAL NUMBER :
FROM : 5D274034Q TO : 00000000000000000000000000000000

i reflashed the bios from official and non modified file but problem not solved
how i do recover my model and serial number please ?

[felipejfc]

Flashing the backup I sent may fix this.
Report

[taoufik.om]

Flashing the backup I sent may fix this.
Report

thanx very much for your generousity and helps you do for all memberS.

i will try and post result tomorrow inchaa ALLAH.

[taoufik.om]

Flashing the backup I sent may fix this.
Report

same thing : wrong model and serial number + one bit problem : after flashing bios @ the startup apeare a message error : "Fatal error: One or more table pointers are invalid. Modification could be unsafe... Press any key to continue boot"
but solved by doing this :

* Booting up the PC from Windows installation disk
* Pressing and holding SHIFT and then pressing F10
* Input "bootsect.exe /nt60 SYS /force"
* Restart the PC

how can i reflash my bios with my first backup i think should restore model and serial after that i can reflash with your file.

[taoufik.om]

bios flashed with backup ; model and serial solved but password remain
flashed with your bios posted password cleared but model and serial are wrong :-(

[taoufik.om]

thank you very much felipejfc

just solve it now using hex editor by copy and past data name from old bios backup to the new one




can i upgrade graphic card or proessor ?