You have to try to find It googleing into internet, may be someone has uploaded It !
Regards
P.S. I ill try to find It
(05-09-2015, 09:09 AM)BDMaster Wrote: [ -> ]You have to try to find It googleing into internet, may be someone has uploaded It !
Regards
P.S. I ill try to find It
Okay thanks,can I just reflash v1.13 which I uploaded here what program to use for reflashing ?
I dont have any more patience for ordering tools and no adequate skills,I just hope this will work
You have to unpack WIN version VIWGQ201.exe by WinRar v.5.20 or above, then find Platform.ini file and
edit by TextEditor the row into this file and change this parameter :
; Supports on DOS WIN SHELL flash.
[Bios_Version_Check]
Flag=2 *********************** TO Flag=0 ****************************************
CheckByBios=0
CheckByBiosErrorMessage="This BIOS file is not allow to flash. The flash process will be terminated."
;This flag is the switch of checking BIOS version.
;Flag (dwsDWS)
; default : 2.
; 0 : Don't check rom file version.
; 1 : Check BIOS version.
; When rom file version is older then BIOS, it will display
; a warning message and close application.
; 2 : Depend on BIOS report.
;CheckByBios (dwsDWS)
; default : 0.
; 0 : Normal process.
; 1 : It will pass version by IHISI to BIOS and check by BIOS.
; When BIOS return not allow to flash, it will be terminated the process.
; When BIOS allow to flash, it will go ahead and do it's normal process.
; When this flag is enable but BIOS not support, it will skip version check and assume allow to flash.
;CheckByBiosErrorMessage (dwsDWS)
; default : "This BIOS file is not allow to flash. The flash process will be terminated."
; String : User defined error message when BIOS is not allow to flash this version image.
So InsydeFlah will not check version and continue to Flash Bios !
Save the file and try then do th result file again !
Let me know
Regards
Ok I get v.38 - 46 - 48 - 50 !
Regards
(05-09-2015, 10:06 AM)BDMaster Wrote: [ -> ]Ok I get v.38 - 46 - 48 - 50 !
Regards
I changed this but no effect,Flag from 2 to 0 and I still get this message.
What to do ? where to look for version newer than v38 ?
You have to check into Bios Setup Menu Security or Advanced Tab about the Downgrade option
like Bios Lock or something same then enable to reflash Bios and try again !
Let me know
Regards
(05-09-2015, 02:07 PM)BDMaster Wrote: [ -> ]You have to check into Bios Setup Menu Security or Advanced Tab about the Downgrade option
like Bios Lock or something same then enable to reflash Bios and try again !
Let me know
Regards
BIOS is pretty poor,only basic,no such thing.
Is there any way to downgrade bios like clearing cmos ?
Edit : I enabled BIOS back flash and it works.
I'll post results then
EDIT 2 : Here are the results with backup_tools.exe
https://www.sendspace.com/file/bovbr6
and here is with universal bios backup
https://www.sendspace.com/file/0sr62r
What is the next step ?
Unpack Result file and look Error 280: Failed to disable write protection for the BIOS space!
I am sorry only SPI PGM can do this jib now !
Regards
(05-09-2015, 02:33 PM)BDMaster Wrote: [ -> ]Unpack Result file and look Error 280: Failed to disable write protection for the BIOS space!
I am sorry only SPI PGM can do this jib now !
Regards
Could I downgrade to v1x of BIOS,you sad he is reflashable and then wont be error ?
Thanks for your effort,I think I'm going in Monday to Lenovo store and breaking this laptop in front them,*ucking piece of *hit.