Here You go :
http://rghost.net/6nRrjgblD
let me know
Regards
Donate to me for my work and time . . . look into my Signature Wink
You can use Sleep Bug too :
Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :
cd \
cd modified
fptw -f bios.bin -bios
(or fptw64 for Windows x64)
Let me know
Regards
Thank you very much! All is working great!
Hello!
I've found some request for whitelist removal on this forum, but my laptop model is different (I believe it's 59344049), so I decided to create new thread.
Here is my spec:
Lenovo g580: i3110M(HM76), Intel HD4000, 8Gb RAM(upgraded), Win10 x64
BIOS: 5ECN42WW (v.4.01)
Wifi whitelisted card: Broadcom BCM943142HM (PCI\VEN_14E4&DEV_4365)
Wifi to install: Atheros AR5B95
Made BIOS backup using "fptw -D bios.rom -BIOS" (
https://github.com/LongSoft/FTK)
https://drive.google.com/folderview?id=0...25Rcnl0Q0k&usp=sharing
I had error 104, but I edited fparts.txt file and got .rom file
--- Flash Devices Found ---
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb) (set Chip Erase Command to 0x60)
EN25QH16 ID:0x1C7015 Size: 2048KB (16384Kb)
Also I'm interested if I should prepare USB stick (need link to guide pls) and on which flash chip I have actual BIOS and why do I need second one?
Thanks in advance!
Here You go :
http://rghost.net/6jSNSm6HG
Try to flash using Sleep Bug before then if You get Error use the USB Stick and Pure DOS . . .
Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :
cd \
cd modified
fptw -f bios.bin -bios
(or fptw64 for Windows x64)
Let me know
Regards
Donate to me for my work and time . . . look into my Signature
Hello! Thanks for reply!
fptw output after waking up:
Intel ® Flash Programming Tool. Version: 8.1.51.1476
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.
Platform: Intel® HM76 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
EN25QH16 ID:0x1C7015 Size: 2048KB (16384Kb)
PDR Region does not exist.
GBE Region does not exist.
Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.
Have flashed by USB Stick DOS Mode ?
It will work sure as is tested until v.5ECN96WW only version locked is 62CN97WW !
let me know
Regards
Hello!
Got same error when using USB stick, but after skip result was successful)
Thank you very much! Works like a charm!
PS Still wondering why it's needed 2 flash chips)
So I will explain . . .
The Chipset look to full Eeprom Memory Mam even are two Chips !
It's only an Architectural convenience !
1. Chip 1 has Descriptors - Me - Pdr - GbE Regions
2. Chip 2 has Bios Region
That's it !
Regards