white list removal request toshiba satellite l750-a102

[odiseuse 3]

Hi all, i have a toshiba L750 a102 and i bought the egpu beast (pcie version) and im having an issue. Black screen issue where the laptop boots for 5-6 times then runs into windows while still in black screen. Ive searched the net and turns out that i need to remove the whitelist of my BIOS ...

SPecs:
System Model: Satellite l750
BIOS:InsydeH2O version 03.60.452.90
Processer: intel core i7-2670QM CPU @ 2.20GHZ(8CPU)
MEMOERY 8192mb RAM
PAGE FILE:2040MB
DIRECT X 11
nVIDEA GEFORCE GT 525M-INTEGRATED RAMDAC 4 GB
pLEASE IF U NEED MORE INFO TELL ME WHAT TO DO.

****First, i need a way to back up my original BIOS
****Second, Please would someone make a modded bios to undo the whitelist ....
PLZ give me details of what to do, kuz i have no idea what the steps for bios modding are.

Thank u in Advance!!!
I dont want to sound like a douche but donation is guaranteed SO please...

[psionx]

http://rghost.net/6slfkjPrc

try using this software.

how to use:
after running exe
navigate to c:\eGPU, right click "setup-disk-image" and select "Run as administrator".
Rebooting will now show a "Setup 1.x" bootitem in the Win7/8 (or XP if still using it) bootmenu.
Select Setup 1.x then Setup 1.30-menu-based to boot a pre-boot environment to configure your eGPU.
Within that environment hit F1 over a menu to get more info on what it does.

[odiseuse 3]

http://rghost.net/6slfkjPrc

try using this software.

how to use:
after running exe
navigate to c:\eGPU, right click "setup-disk-image" and select "Run as administrator".
Rebooting will now show a "Setup 1.x" bootitem in the Win7/8 (or XP if still using it) bootmenu.
Select Setup 1.x then Setup 1.30-menu-based to boot a pre-boot environment to configure your eGPU.
Within that environment hit F1 over a menu to get more info on what it does.

ill give it a try but its not clear if that solves the whitelist issue, plus i dont wana do anything that might damage the bios!!!

[psionx]

nothing but flashing a new bios can damage the bios.

this software is just a modified version of the freedos os that acts as a fake bios. in order for it to work it has to preload before the os so changes are only temporary untill you restart your pc and reenter the egpu menu.

also the option that removes whitelist should be "re-assign busses".

[odiseuse 3]

nothing but flashing a new bios can damage the bios.

this software is just a modified version of the freedos os that acts as a fake bios. in order for it to work it has to preload before the os so changes are only temporary untill you restart your pc and reenter the egpu menu.

also the option that removes whitelist should be "re-assign busses".

explain step by step dumb version plz

[psionx]

when you install the tool and restart using the steps in post 2 you'll get option to boot into menu in image above highlight the "video card" option and hit enter. you will see a list pop up that has the option to re-assign busses select it then reboot.

[expo-9009]

I have the same problem. My pc restart every time or close him self. I have unplug my egpu and do the above steps but dont helped me
Edit: Do i need to do with wifi card pluged in ?

[odiseuse 3]

when you install the tool and restart using the steps in post 2 you'll get option to boot into menu in image above highlight the "video card" option and hit enter. you will see a list pop up that has the option to re-assign busses select it then reboot.

I did everything u told me to do, plus i even changed a port from gen 1 to gen 2 but it didnt work... any other sugestions?
plus the beast only seems to have the red light on without any other does someone know y?

[expo-9009]

If you power up it will have red light.
I have set graphic device in bios from optimus to uma only and now the black screen is gone and it tells me to remove the wronge wlan card. So still have the whitelist problem but not anymore blackscreen and restarting.

[psionx]

boot menu

chainload menu

egpu menu


ok to get it to work.
1.swap wifi card with egpu while on the chainload menu.
2.configure settings in egpu menu
3.reboot
4.once back in chainload menu use startup.bat option.
5.profit! . if not then change chainload settings in egpu menu and try again
for any other problems use F1 help