Do you have flash programmer? Looks editable to me, but may take a few initial test methods first before we find correct method to enable more menu sections. If you have flash programmer, please post image of your BIOS now, so all main sections are visible.
If you do not have flash programmer (Ch341A) and SOIC8 test clip cable, order those now and post back when they arrive. It's only $3 and $2.50
09-12-2018, 09:22 PM (This post was last modified: 09-12-2018, 09:25 PM by Lost_N_BIOS.)
Yes, I dumped 4MB BIOS with python from the exe, it can be edited in AMI tools, and via module extraction etc, so I think progress can be made with this BIOS after a few test trying different methods.
I agree, dumped BIOS may be best/safest one to edit too, thanks for the suggestion DeathBringer
Try to make a dump of the BIOS with AFU, from command line or DOS
AFU /O bios.bin
I honestly forgot about this thread. I have a programmer that I used to flash a dell Vbios onto a 7970M MXM card for this laptop.
I also have a spare M6600 that I can test a modded bios on.
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
11-08-2018, 01:03 AM (This post was last modified: 11-08-2018, 01:06 AM by Lost_N_BIOS.)
Since you have a programmer, post a dumped BIOS and lets play around and see how it goes. Or, I can edit the BIOS I extracted, up to you?
I assume it will be fine, I was helping user with M6700 and several different mods, including unlocking MSR 194 unlock over here if you want to read the progress as we edited, should be OK to mod!
The M6700 board has 4MB + 8MB BIOS, so if this one does too, maybe best to edit a dump instead via AFU, or FPT I think will give 12MB dump, or Programmer per chip (I can combine, or we leave as 4MB/8MB)
Posts: 19
Threads: 6
Joined: Feb 2010
Reputation:
0
(11-08-2018, 01:03 AM)Lost_N_BIOS Wrote: Since you have a programmer, post a dumped BIOS and lets play around and see how it goes. Or, I can edit the BIOS I extracted, up to you?
I assume it will be fine, I was helping user with M6700 and several different mods, including unlocking MSR 194 unlock over here if you want to read the progress as we edited, should be OK to mod!
The M6700 board has 4MB + 8MB BIOS, so if this one does too, maybe best to edit a dump instead via AFU, or FPT I think will give 12MB dump, or Programmer per chip (I can combine, or we leave as 4MB/8MB)
Alright, I will tear down the laptop soon and look for the bios chips.
Posts: 19
Threads: 6
Joined: Feb 2010
Reputation:
0
Sorry for the delay but the holidays can be brutal!
So I purchased a used M6600 motherboard ($65 on Fleabay) as a replacement and dumped both bios chips.
The first chip is a Winbond W25Q16 and the second is a MXIC MX25L6406E, however my Flashcat detected it as a Winbond W25Q64FW.
I'm not sure what bios version this is but it will be in the laptop soon and I can run the Dell Bios update utility.
I will also dump after updating the bios.
Hope this helps!
The current motherboard posts the LED code for a CPU error.
However, it will boot up after restart and only happens on cold boot.
System is also sluggish even after fresh imaging.
And a used system pull board was only $65 on Fleabay.